Bose A20 Aviation 2015-present Owner's guide - Page 14
Using the dual general aviation plugs, Using other plug types, To disconnect the headset
View all Bose A20 Aviation 2015-present manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Preparing the Headset for Use To disconnect the headset 1. Pull back on the sleeve near the end of the 6-pin plug. 2. Gently continue pulling back to remove the plug from the connector. Caution: Do not pull the connector out without first pulling back the sleeve. Forcing the connector out will damage the cable and/or the aircraft instrument panel. Pull sleeve back, then pull plug out Sleeve Using the dual general aviation plugs The most common battery powered (only) version of the headset has two general aviation (G/A) plugs that connect to the aircraft audio. Although the plugs look similar, the microphone plug is shorter, thinner, and has a slightly different shape than the intercom plug. Insert the thicker intercom plug in first. It will only fit into one of the jacks. Then insert the thinner microphone plug into the other jack. Microphone Intercom/Audio Using other plug types The headset is also available with other types of plugs for connecting to various aircraft audio jacks. These single-plug connectors should be inserted into the appropriate jack on your aircraft control panel. Refer to "Power and cable variations" on page 9. 14 - English