Bose A20 Aviation 2015-present Owner's guide - Page 35

Installation Mounting the aircraft panel connector The aircraft panel connector is part of the optional 6-pin wiring harness assembly. Visit www.Bose.com or www.global.Bose.com for information or purchase. Warning: The aircraft panel connector must be mounted by a technician who is qualified to perform this type of avionics installation for the aircraft you are using. Mount the connector into a cutout, using the diagrams below as a guide. 12.5mm .49" Receptacle - Pinout (front view) Pin 6 14.0mm .55" Pin 1 Aircraft Interface Schematic RED BLK WHT BLK/WH BLU WHT WH/BLU BLK/WH • 1 V+IN • 2 GND • 3 COMM L • 4 COMM R • 5 MIC HI • 6 MIC LO Connect the eight wires as follows: • Two for the microphone • Two for audio • One for power • One for ground • Two for audio shields Audio and microphone wires should be connected to the back of the existing microphone and headphone jacks, leaving existing jacks intact for use with conventional headsets. This is usually the fastest installation method. English - 35