Bose Lifestyle 135 Home Entertainment Operating guide - Page 29
Problem, What to
View all Bose Lifestyle 135 Home Entertainment manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
CARE AND MAINTENANCE Problem What to do TV does not respond to remote commands (135 systems only) • Make sure the speaker array is not blocking the IR sensor on the TV. Change the position of the TV and speaker array so that the IR sensor is not blocked. • For details on the location of the TV's IR sensor, refer to the owner's guide that came with your TV. Intermittent bass (135 systems only) • Check that the status indicator on the Acoustimass® module is orange and not blinking. • If the speaker array status indicator is blinking orange: • Check that the Acoustimass module is plugged into a live AC wall outlet and the status indicator is glowing orange. • Press the Setup button on the control console and select the "Reconnect Acoustimass" menu item. Follow the onscreen instructions. • Try moving any possible sources of wireless interference, such as a wireless computer network router, another wireless device, or a microwave oven, further away from the system. Sound is marred by a loud • Contact Bose® Customer Service to determine if and how other hum or buzz, which may electrical devices in the room may be creating unwanted signals, be electrical in nature and to obtain possible remedies. Radio does not work (Not applicable to T20 and T10 systems.) • Make sure antennas are connected properly. • Move AM antenna at least 20 inches (50 cm) from the control console and Acoustimass® module. • Adjust antenna position to improve reception. • Make sure the AM antenna is in an upright position. • Move antennas farther from control console, TV, or other electronic equipment. • Select another station. You may be in an area of weak signal coverage for some stations. FM sound is distorted • Adjust antenna position to reduce interference. (Not applicable to T20 and • Fully extend the FM antenna. T10 systems.) Picture is blurry when viewing 3D content • If your 3D glasses are of the active type, make sure they are turned on. • Try changing the 3D system option to a different setting. • If the problem persists, make sure the speaker array is not blocking the IR sensor on the TV. Change the position of the TV and speaker array so that the IR sensor is not blocked. • For details on the location of the TV's IR sensor, refer to the owner's guide that came with your TV. Sound is distorted • Make sure the audio input cable is not damaged and the connections are secure on both ends. • Reduce the volume output level from any external devices connected to the control console. • (135 systems only) Remove the protective film from the trim and grille on the speaker array and the front of the Acoustimass module. No sound from a connected device • Check the connections. • If using a coaxial or optical audio connection, make sure you have not made both types of connections to the same input on the control console. • Make sure that device is turned on. • Refer to the owner's manual that came with the device. English - 25