Bose Lifestyle 48 Series III Lifestyle® VS-2 video enhancer - Owner's - Page 11
English
View all Bose Lifestyle 48 Series III manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
English Choosing connection types for your A/V devices 1. Look at the rear panel of each A/V device to determine what type of video output connectors it has. 2. In the following table, choose the type of available video connector that provides the highest possi- ble video quality. We recommend using a component connection if it is available. Place a check mark in the table for the connector type used for each of your A/V devices. If any of your A/V devices do not have component video connectors, you can use either an S-Video or Composite connection. Remember, the VS-2 converts either of these up to component video format. Video Quality Best Video Connector Component AUX VCR CBL•SAT (Other) Good S-Video Standard Composite Connecting your A/V devices to the VS-2 1. Plug one end of the video cable into the appropriate video output connector(s) on your A/V device. If you are making a component connection, be sure to match the color of the plug to the color of the connector. 2. Plug the other end of the video cable into the appropriate Video INPUT connector(s) on the VS-2. Again, if you are making a component connection, be sure to match the color of the plug to the color of the connector. 3. Refer to your LIFESTYLE® system installation guide for information on making audio connections. VS-2 11