Bose Lifestyle 48 Series III Lifestyle® VS-2 video enhancer - Owner's - Page 21

Maintaining Your VS-2 - problems

Get Bose Lifestyle 48 Series III PDF manuals and user guides View all Bose Lifestyle 48 Series III manuals
Add to My Manuals
Save this manual to your list of manuals

Page 21 highlights

English Maintaining Your VS-2 Cleaning • Use only a soft, dry cloth to clean the outside of the VS-2. • Do not use any solvents, chemicals, or cleaning solutions containing alcohol, ammonia, or abrasives. • Do not allow liquids to spill into any openings. • Do not use any sprays near the VS-2. Troubleshooting Problem What to do System will not turn on • Make sure the VS-2 cable is correctly connected between the VS-2 and the media center (see "Connecting the VS-2 to your media center" on page 6). • Make sure the media center power supply is plugged into an AC receptacle. No picture on TV • If you have not done so, load the software update disc into the DVD player. See "Updating the system software" on page 5. • Make sure the VS-2 cable is correctly connected between the VS-2 and the media center (see "Connecting the VS-2 to your media center" on page 6). • Make sure you connected your TV to the TV output connector on the VS-2. • Make sure you have selected the correct video input on your TV. The wrong picture appears • If you have not done so, load the software update disc into the DVD player. See "Updating the system software" on page 5. on my TV for the source I • Make sure your sources are connected to the appropriate VS-2 inputs. selected • Make sure the Serial Data plug from the VS-2 is fully inserted into the media center connector. • Make sure you have selected the correct video input on your TV. Some sources do not appear on my TV • Make sure your sources are connected to the appropriate VS-2 inputs. • Make sure you have not used a source that outputs a video format that is higher in quality than what your TV can accept. 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
21
English
Maintaining Your VS-2
Cleaning
•
Use only a soft, dry cloth to clean the outside of the VS-2.
•
Do not use any solvents, chemicals, or cleaning solutions containing alcohol, ammonia, or abrasives.
•
Do not allow liquids to spill into any openings.
•
Do not use any sprays near the VS-2.
Troubleshooting
Problem
What to do
System will not turn on
•
Make sure the VS-2 cable is correctly connected between the VS-2 and the media center (see “Connecting the VS-2 to your media
center” on page 6).
•
Make sure the media center power supply is plugged into an AC receptacle.
No picture on TV
•
If you have not done so, load the software update disc into the DVD player. See “Updating the system software” on page 5.
•
Make sure the VS-2 cable is correctly connected between the VS-2 and the media center (see “Connecting the VS-2 to your media
center” on page 6).
•
Make sure you connected your TV to the TV output connector on the VS-2.
•
Make sure you have selected the correct video input on your TV.
The wrong picture appears
on my TV for the source I
selected
•
If you have not done so, load the software update disc into the DVD player. See “Updating the system software” on page 5.
•
Make sure your sources are connected to the appropriate VS-2 inputs.
•
Make sure the Serial Data plug from the VS-2 is fully inserted into the media center connector.
•
Make sure you have selected the correct video input on your TV.
Some sources do not
appear on my TV
•
Make sure your sources are connected to the appropriate VS-2 inputs.
•
Make sure you have not used a source that outputs a video format that is higher in quality than what your TV can accept.