Bose Lifestyle 48 Series III Lifestyle® VS-2 video enhancer - Owner's - Page 6

Connecting the VS-2 to Your Media Center English Preparation When setting up a LIFESTYLE® system with the VS-2, the media center power supply plugs into the VS-2 instead of the media center. • If you are setting up the VS-2 and your LIFESTYLE® system at the same time, find the media center power supply in the LIFESTYLE system carton before you begin. • If you are adding the VS-2 to an existing LIFESTYLE® system, turn off your LIFESTYLE system, wait 30 seconds, and unplug the media center power supply from the wall outlet. Then, disconnect the power supply from the rear panel of the media center. Also, remove any video cables from the Video OUT and Video IN connectors on the media center. Connecting the VS-2 to your media center • Connect the 4-connector end of the VS-2 cable to your media center: 1 Insert the Serial Data plug into the Serial Data connector. 2 Insert the DC Power plug into the DC Power connector. 3 Insert the Composite plug into the Composite Video OUT connector. 4 Insert the S-Video plug into the S-Video OUT connector. • Connect the other end of the VS-2 cable to the VS-2 end panel: 5 Insert multi-pin plug into the Media Center connector. 6 Insert the DC Power plug into the DC POWER Out connector. • Connect the media center power supply to the end panel of the VS-2: 7 Insert the DC power cable from the media center power supply into the DC POWER In connector. Note: Straighten the DC power cord from the media center power supply and from the VS-2 to the media center as much as possible. This cord is used as the antenna for your LIFESTYLE® system remote control. Media center rear panel 12 34 Media center power supply VS-2 end panel VS-2 cable 7 5 6 WARNING: The VS-2 must be used only with the media center power supply that came with your LIFESTYLE® DVD home entertainment system. 6