Bose Lifestyle 48 Bose® link AL8 homewide wireless audio link - Owner - Page 7
Setup - speaker wire
View all Bose Lifestyle 48 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Français Español English SETUP Making the connections You can connect one transmitter and up to 8 receivers for each LIFESTYLE® system. The transmitter and receiver each use one of the two supplied Bose® link A cables, which are 7 feet (2 meters) long. Each unit also connects to power using one of the two supplied power packs. Note: Instructions for use with a non-Bose tuner/receiver vary slightly from those below. For details, refer to "Instructions for non-Bose or older Bose products" on page 7. For the transmitter 1. Connect one end of a Bose link A cable to the jack labeled Bose® link INPUT on the transmitter connection panel. 2. Connect the other end of the cable to the Bose link speaker jack, below the Main Speaker jack, on the LIFESTYLE® media center connection panel (Figure 3). Figure 3 Transmitter connecting to a LIFESTYLE® media center AC Power Status LED Figure 4 Transmitter and another product connecting to a LIFESTYLE® media center Transmitter Bose® link INPUT Bose link A cable LIFESTYLE® media center Main Speaker jack Bose link Speaker jack Note: If another product is already connected to the Bose link Speaker jack on the media center, disconnect it there. You can use the wireless audio link to replace this wired connection. Or, to continue using this connection, reconnect the cable to the jack labeled Bose® link OUTPUT on the transmitter connection panel (Figure 4). Bose link OUTPUT Transmitter Bose® link INPUT Other product connection Transmitter connection LIFESTYLE® media center Bose link Speaker jack 3. Insert the small plug on the power pack cable into the AC Power jack on the transmitter and plug the pack into a wall outlet. The Status LED lights to verify this power connection. Note: For information on the meaning of the different Status LED lights, refer to "Check the indicators and settings" on page 8. 6