Bose Lifestyle 5 Series III Owner's guide - Page 21

Maintaining Your Lifestyle® 5 music system Changing the house code settings Each Lifestyle® remote control uses a system of matching house codes to communicate with its corresponding music center. If your remote's commands ever conflict with those of another nearby Lifestyle® system, you can easily set a new house code for your system and its remote control(s) by following the procedures below. 1. Open the remote control battery cover. 2. Locate the miniature switches (Figure 22). Change the position of switch 2, 3, or 4 by moving it in the opposite direction from its current setting. Note: Do not change any other switches at this time. 3. Replace the battery cover on the remote control. 4. Press the OFF key on the console. 5. Open the CD cover. 6. Press the STORE key. The display will begin to flash '- -'. 7. Within two seconds while the display is flashing, press any key on the remote control. The display stops flashing and momentarily shows '- -' to confirm recognition of the house code. The system will remain off. 8. If you have additional remote controls, open the battery cover of each one and change the switches to match those of the first remote control. It is not necessary to repeat steps 4-7. Figure 22 Miniature switches for setting house codes and speakers House code switches ON K40 l 2345678 AM251174_03_V.pdf October 22, 2001 19