Bose Lifestyle 5 The Bose® Lifestyle® amplifier - Owner's gu - Page 12

Setting Up Your Lifestyle® Stereo Amplifier Figure 9 Setting up a Zone 2 remote control Setting up the remote control You need to set up a second remote control to operate the ZONE 2 output. 1. Remove the remote control battery cover and locate the miniature switches (Figure 9). 2. Make sure that the house code settings (switches 1, 2, 3, and 4) match those in your first remote. 3. Make sure switches 5, 7, and 8 are up, and switches 6 and 9 are down. Note: Refer to your Lifestyle® system owner's guide for more information on operating your system in more than one room. ON Figure 9a Setting Zone 2 Protocol Setting Zone 2 Protocol For the SA-1 amplifier to work properly with a Lifestyle® media center, you will need to set the Zone 2 Protocol to Legacy mode (Figure 9a). 1. While your Lifestyle® DVD system is on, press the Settings button on your remote control. This will open the on-screen display. 2. Scroll down with the down-arrow button and select System Setup using the enter button. 3. You will now see a menu entitled System Setup (1 of 3). Scroll down to "more...". Continue to scroll down through (2 or 3) to (3 of 3). The last item on System Setup (3 of 3) is Zone 2 Protocol. 4. Use the right-arrow button to change the protocol from Normal to Legacy. 5. Before using Zone 2, shut off the system and turn it on again; this ensures that the Zone 2 Protocol is reset to Legacy mode. On Off Mute All Mute SOURCE / INPUT CD/DVD Changer FM/AM TV VCR AUX MENU / NAVIGATION Settings Tune Disc Seek Enter Channel Chapter Preset Track Volume 1 2 3 4 5 6 7 8 9 0 PLAYBACK Stop Pause Play Shuffle Repeat Settings Settings ( ) System Setup Enter System Setup (3 of 3) Zone 2 Protocol: Legacy 10 January 4, 2002 AM262840_00_V.pdf