Bose Lifestyle T20 SL2 wireless surround link - Owner's guide - Page 9

English Dansk Deutsch Español Français Italiano Nederlands Svenska YOUR SL2 WIRELESS SURROUND LINK Troubleshooting Problem What to do Blinking red Status LED on either the SL2 transmitter or receiver • Disconnect the unit from the AC power outlet. • Remove any possible obstruction to ventilation and reposition the unit upright with clear space around the ventilation openings on each side. If the ventilation was obstructed, allow the unit a few minutes to cool before reconnecting it to the AC power outlet. • If it continues to blink red, check the cable connection between the SL2 receiver and the surround speakers. Make sure the connections are secure and the cable wires are not touching each other, which can cause a short circuit. Refer to "Connecting the SL2 receiver" on page 7. Reconnect the unit to the AC power outlet. • If it continues to blink red, unplug the unit from the power outlet and contact Bose® Customer Service. Refer to the address list included in the SL2 carton. No sound or intermittent sound • Make sure the audio source is playing and the program selected includes surround sound audio. • Check to be sure both the SL2 transmitter and receiver power packs are properly plugged into functioning AC power outlets. Refer to "Making the connections" on page 6. • Make sure that cables are properly connected to the SL2 transmitter, the Acoustimass® module, the SL2 receiver, and the surround speakers. The connectors must be inserted securely in the jacks. • Make sure the SL2 transmitter and receiver are no less than 61/2 feet (2 meters) and no more than 30 feet (9.2 meters) apart. • Locate the small opening labeled Reset on the bottom of both the SL2 transmitter and the SL2 receiver. Using a fine-pointed tool (like a straightened paper clip), press inside the opening on the transmitter. And, within 30 seconds, in the same way press inside the opening on the receiver. • Move the receiver, the transmitter, or both so the transmission path between them does not intersect with large metal objects in your room or other obstructions (like a fish tank full of water). Interference with a wireless (5.8GHz) phone • Increase the distance from each SL2 unit to the phone. • Press the channel button on the phone (if one is provided) to choose a different channel for phone transmissions. Contacting Customer Service For additional help in solving problems, contact Bose Customer Service. Refer to the address sheet included in the carton. 9