Bose QuietComfort Earbuds Bundle Multilingual Owners Guide - Page 39

BLUETOOTH CONNECTIONS SWITCH BETWEEN PREVIOUSLY-CONNECTED DEVICES Use the Bluetooth button l in the charging case to switch between previously-connected devices. TIP: You can also use Bluetooth settings to switch between previously-connected devices. 1. Press and release the Bluetooth button l in the charging case to hear which device is connected. 2. Within 2 seconds, press and release the Bluetooth button l in the charging case again to connect to the next ­device in the device list. 3. Repeat until you hear the correct device name. You hear a tone that indicates when the device is connected. 4. Play audio on the connected mobile device. NOTE: If two devices are already connected to the earbuds, the newly-connected device replaces the second device that was previously connected. CLEAR THE EARBUD DEVICE LIST 1. Press and hold the Bluetooth button l in the charging case until you hear "Bluetooth device list cleared." NOTE: If you're not wearing the earbuds, press and hold the Bluetooth button l in the charging case for 10 seconds. The earbud status lights slowly pulse blue. 2. Delete the earbuds from the Bluetooth list on your device. All devices are cleared, and the earbuds are ready to connect (see page 15). | 3 9 E N G