Bose T8S ToneMatch Mixer English Owners Guide - Page 13

Connecting the T4S/T8S via Analog Connection

Get Bose T8S ToneMatch Mixer PDF manuals and user guides View all Bose T8S ToneMatch Mixer manuals
Add to My Manuals
Save this manual to your list of manuals

Page 13 highlights

System Setup Connecting the T4S/T8S via Analog Connection 1. Make sure the device you are connecting to and the T4S/T8S are powered off and the T4S/T8S Master volume control is set to minimum. 2. Using XLR balanced cables, connect one or two devices to the XLR Stereo Outputs of your T8S (see Figure 10). Note: The T4S/T8S can be connected to a device via the Analog R Output port using a 1/4" TRS cable (sold separately). Plug the other end of the TRS cable into the Analog Input port of the device. To connect the T4S/T8S to two devices, connect a second device to the Analog L Output port on the T4S/T8S using a 1/4" TRS cable. 3. Connect a ToneMatch® power supply to the Power port of the T4S/T8S and plug it into a live AC outlet. Refer to "Connecting the ToneMatch® Power Supply" on page 14. 4. Turn on the T4S/T8S mixer and then turn on the device. 5. Connect your instruments and adjust levels. Refer to "Optimizing Input Gain and Output Volume" on page 17. Figure 10. Two F1 systems connected to a T8S via analog connection USB AUDIO MAIN OUT M USB AUDIO MAIN OUT MONO M () () English - 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
System Setup
English - 13
Connecting the T4S/T8S via Analog Connection
1.
Make sure the device you are connecting to and the T4S/T8S are powered off and the T4S/T8S Master
volume control is set to minimum.
2.
Using XLR balanced cables, connect one or two devices to the XLR Stereo Outputs of your T8S (see
Figure 10).
Note:
The T4S/T8S can be connected to a device via the Analog R Output port using a °" TRS cable (sold
separately). Plug the other end of the TRS cable into the Analog Input port of the device. To connect the
T4S/T8S to two devices, connect a second device to the Analog L Output port on the T4S/T8S using a °"
TRS cable.
3.
Connect a ToneMatch® power supply to the Power port of the T4S/T8S and plug it into a live AC outlet.
Refer to “Connecting the ToneMatch® Power Supply” on page 14.
4.
Turn on the T4S/T8S mixer and then turn on the device.
5.
Connect your instruments and adjust levels. Refer to “Optimizing Input Gain and Output Volume” on
page 17.
Figure 10. Two F1 systems connected to a T8S via analog connection
M
(
)
MAIN OUT
USB AUDIO
MONO
(
M
USB AUDIO
(
)
M
MAIN OUT
()
M