Brother International 3100c Users Manual - English - Page 38
Connecting the MFC, Connecting an External Telephone - mfc manual
UPC - 012502603740
View all Brother International 3100c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Connecting the MFC Connecting an External Telephone Although your MFC does not have a handset, you can connect a separate telephone (or telephone answering device) directly to your MFC. Connect the modular plug on the telephone's line cord to the jack labeled EXT. on the back side of the MFC. Whenever this phone (or TAD) is in use, the LCD shows TELEPHONE. Connecting an External Telephone Answering Device (TAD) Sequence You may choose to connect an answering system. However, when you have an external TAD on the same telephone line as the MFC, the TAD answers all calls. The MFC "listens" for fax calling (CNG) tones. If it hears them, the MFC takes over the call and receives the fax. If it doesn't hear CNG tones, the MFC lets the TAD continue playing your outgoing message so your caller can leave you a voice message. The TAD must answer within five rings (the recommended setting is two rings). The MFC cannot hear CNG tones until the TAD has answered the call, and with five rings there are only 8-10 seconds of CNG tones left for the fax "handshake." Make sure you carefully follow instructions in this manual for recording your outgoing message. We do not recommend using the toll saver feature on your external answering machine if it exceeds five rings. If you do not receive all your faxes, you must reset the setting on your external TAD to four rings. If You Subscribe to your Telephone Company's Distinctive Ring Service: You may connect an external TAD to a separate wall jack only if you subscribe to your telephone company's Distinctive Ring service, have registered the distinctive ring pattern on your MFC, use that number as a fax number and have set your machine's Receive mode to MANUAL. The recommended setting is three or four rings on the external TAD when you have the telephone company's Distinctive Ring Service. If You Do Not Subscribe to Distinctive Ring Service: You must plug your TAD into the EXT. jack of your MFC. If your TAD is plugged into a wall jack, both your machine and the TAD will try to control the phone line. (See illustration on page 2-12.) 2 - 11 A S S E M B L Y A N D C O N N E C T I O N S