Brother International 790CW Users Manual - English - Page 102
Additional Message Center operations, Setting the maximum time for incoming messages
UPC - 012502620501
View all Brother International 790CW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Chapter 9 Additional Message Center operations 9 Setting the maximum time for incoming messages 9 Your machine's default setting will save incoming messages up to 30 seconds long. To change this setting follow the steps below: a Press MENU. b Press a or b to display Fax. c Press Fax. d Press a or b to display Setup Msg Ctr. e Press Setup Msg Ctr. f Press ICM Max.Time. g Press the maximum time setting for incoming messages (30, 60, 120 or 180 seconds). h Press Stop/Exit. Setting toll saver 9 When the toll saver feature is on, the machine will answer after two rings if you do have voice or fax messages, and after four rings if you do not have any messages. This way, when you call your machine for remote retrieval, if it rings three times, you have no messages and can hang up to avoid a toll charge. The toll saver feature is only available when Message Center mode is on. When toll saver is On, it overrides your ring delay setting. If you are using Distinctive Ring, do not use the Toll Saver feature. a Press MENU. b Press a or b to display Fax. c Press Fax. d Press a or b to display Setup Receive. e Press Setup Receive. f Press a or b to display Ring Delay. g Press Ring Delay. h Press Toll Saver. i Press On (or Off). j Press Stop/Exit. 86