Brother International 790CW Users Manual - English - Page 57
Changing fax resolution, Dual access (Black & White only), Real time transmission, Color Start
UPC - 012502620501
View all Brother International 790CW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Sending a Fax Changing fax resolution 5 The quality of a fax can be improved by changing the fax resolution. a Press (Fax). b Press d or c to display Fax Resolution. c Press Fax Resolution. d Press the resolution you want. Note You can choose four different resolution settings for black & white faxes and two for color. Black & White Standard Fine S.Fine Photo Suitable for most typed documents. Good for small print and transmits a little slower than Standard resolution. Good for small print or artwork and transmits slower than Fine resolution. Use when the document has varying shades of gray or is a photograph. This has the slowest transmission. Color Standard Fine Suitable for most typed documents. Use when the document is a photograph. The transmission time is slower than Standard resolution. If you choose S.Fine or Photo and then use the Color Start key to send a fax, the machine will send the fax using the Fine setting. Dual access (Black & White only) 5 You can dial a number and start scanning the fax into memory-even when the machine is sending from memory, receiving faxes or printing PC data. The LCD shows the new job number and available memory. The number of pages you can scan into the memory will vary depending on the data that is printed on them. Note If the Out of Memory message appears 5 while scanning a document, press Stop/Exit to cancel or Black Start to send the scanned pages. Real time transmission 5 When you are sending a fax, the machine will scan the document into the memory before sending. Then, as soon as the telephone line is free, the machine will start dialing and sending. If the memory is full and you are sending a black and white fax from the ADF, the machine will send the document in real time (even if Real Time TX is set to Off). Color faxes and faxes from the scanner glass cannot be sent until you clear some of the memory. Sometimes, you may want to send an important document immediately, without waiting for memory transmission. You can turn on Real Time TX. a Press (Fax). b Press d or c to display Real Time TX. c Press Real Time TX. d Press On. Note In real time transmission, the automatic redial feature does not work when using the scanner glass. 41