Brother International BAS-341F Programmer Instruction Manual - English - Page 134
Feed, The example in the left is used for explanation
View all Brother International BAS-341F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
Inputting the end code 1. Press at the last stitch and press . The needle moves to points G and H. Chapter 3 Programming with Command Function Saving 1. Specify the program number on the operation panel and press the read/write switch for writing into the floppy disk. Ending program 1. Press . Feed After thread breaking, a feed is set for continuous sewing with the work clamp in position. The example in the left is used for explanation of programming pattern 2 with a feed after pattern 1. Programming 1. Press . The work clamp moves to the home position and the programmer screen is displayed. 2. Move the work clamp with . Press when the needle point is at point A of the pattern. The first stitch (point A) is programmed. Programmer 133
Programmer
133
Chapter 3 Programming with Command Function
Inputting the end code
1.
Press
at the last stitch and press
.
The needle moves to points G and H.
Saving
1.
Specify the program number on the operation
panel and press the read/write switch for writing
into the floppy disk.
Ending program
1.
Press
.
Feed
After thread breaking, a feed is set for continuous sewing with
the work clamp in position.
The example in the left is used for explanation of
programming pattern 2 with a feed after pattern 1.
Programming
1.
Press
.
The work clamp moves to the home position and
the programmer screen is displayed.
2.
Move the work clamp with
. Press
when the needle point is at point A of the
pattern.
The first stitch (point A) is programmed.