Brother International BAS-341F Programmer Instruction Manual - English - Page 174
Creating a multiple stitch, When the needle point is moved to the corner, press
View all Brother International BAS-341F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 174 highlights
Chapter 3 Programming with Command Function Creating a multiple stitch Command to be used Input the start point for a multiple stitch. Input the number of lines for a multiple stitch raging from 2 to 99 in . Ex.) The number of line for a multiple stitch 5 lines Input value 505 Input the stitch length in . Press to input a split. 1. Determine the embroidering start point with 2. Press . and press . 3. Move the needle point to the second point or after with and press . 4. When the needle point is moved to the corner, press . 5. Repeat steps 3 and 4 until the end point of the inside (or the outside) line is input. Press . Move the needle point to the start point of the outside (or the inside) line with , and press . 6. Program all necessary points in the same manner. 7. Input the desired number of lines as . 8. Input the desired stitch length as . 9. Press . Programmer 173