Brother International BAS-341F Programmer Instruction Manual - English - Page 40
when the needle point is at point D of the pattern., When point C is programmed, press
View all Brother International BAS-341F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
3. Move the work clamp with . Press when the needle point is at point A of the pattern. The first stitch (point A) is programmed. 4. Select with and press . 5. Move the work clamp with . Press when the needle point is at point B of the pattern. 6. Repeat step 5 and create the program to point C. 7. When point C is programmed, press . Chapter 2 Programming with Help Function 8. Select with and press . 9. Move the work clamp with . Press when the needle point is at point D of the pattern. 10. Repeat step 9 and create the program to point F. 11. Press . 12. Select with and press . 13. Create the program to point H. 14. When point H is programmed, press . Programmer 39
Programmer
39
Chapter 2 Programming with Help Function
3.
Move the work clamp with
. Press
when the needle point is at point A of the pattern.
The first stitch (point A) is programmed.
4.
Select
with
and press
.
5.
Move the work clamp with
. Press
when the needle point is at point B of the
pattern.
6.
Repeat step 5 and create the program to point
C.
7.
When point C is programmed, press
.
8.
Select
with
and press
.
9.
Move the work clamp with
. Press
when the needle point is at point D of the pattern.
10.
Repeat step 9 and create the program to point F.
11. Press
.
12. Select
with
and press
.
13.
Create the program to point H.
14.
When point H is programmed, press
.