Brother International BAS-341F Programmer Instruction Manual - English - Page 127
Setting attribute, Other operations, Turn off all option outputs.
View all Brother International BAS-341F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
Chapter 3 Programming with Command Function Copying in the reverse direction Moving data in parallel before the current needle position (changing the moving amount data of the needle position) Moving data in parallel after the current needle position (using needle drop data to the moved position) Setting attribute Setting the number of feed boundaries to be ignored (0 - 99) Stopping the needle at the upper end (only when the needle position is at split) Stopping the needle at the lower end (only when the needle position is at split) The maximum sewing speed becomes 400 rpm or lower. The maximum sewing speed becomes 1200 rpm or lower. The maximum sewing speed becomes 800 rpm or lower. The maximum sewing speed becomes 600 rpm or lower. Cancels low speed data setting Turns on option output 1. Turns on option output 2. Turns on option output 3. Turn off all option outputs. Not breaking thread for feed (only when the needle position is at feed) Breaks thread for feed (only when the needle position is at feed) Other operations Returning from pattern image to the setting screen. Returning from error message to the previous screen. Displaying data image Turning on (off) the programmer Canceling command 126 Programmer