Brother International BAS-341F Programmer Instruction Manual - English - Page 133
Ending program, Programming
View all Brother International BAS-341F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 133 highlights
Chapter 3 Programming with Command Function Ending program 1. Press . Double stitch A double stitch is programmed to make two lines with a constant width. The example in the left is used for explanation of a double stitch to the left of sewing direction. When the line changes from straight to curve or curve to straight as in points B or E, be sure to press to make a split. More intermediate points such as points C or D will create smooth curves. Programming 1. Press . The work clamp moves to the home position and the programmer screen is displayed. 2. Move the work clamp with . Press when the needle point is at point A of the pattern. The first stitch (point A) is programmed. 3. Press and press . is the command for the double stitch. Input the width of the double stitch in . 3.0 mm is input in the example. 4. Input the stitch length and press . 3.0 mm is input in the example. Input 030 to make the stitch length to 3.0 mm. 5. Create the program to point F in the similar manner of curve program. If a straight line is present as in the example, press at the end of the line. 132 Programmer