Brother International BAS-341F Programmer Instruction Manual - English - Page 159
Turn the pulley with a hand and move the, with the needle to indicate the position of point
View all Brother International BAS-341F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 159 highlights
Chapter 3 Programming with Command Function 2. Move the work clamp with so that the needle point is at B of the pattern. Record the coordinates (values of and ). If the moving distance is long, press movement. before 3. Press . The work clamp moves to the home position. 4. Press and press . The needle point moves to point C. 5. Move the work clamp with coordinates recorded in step 2. The moved point is now D. If the moving distance is long, press for the before movement. 6. Turn the pulley with a hand and put a marking with the needle to indicate the position of point D. 7. Turn the pulley with a hand and move the needle to the top point. 8. Press . The work clamp returns to the home position. 9. Move the work clamp with . Press when the needle point is at D of the pattern. Saving 1. Specify the program number on the operation panel and press the read/write switch for writing into the floppy disk. Ending program 1. Press . 158 Programmer