Brother International CP-2000 PC Link Manual - English - Page 5

1. Installation and Setup Before Use This chapter takes you through each step of the installation process. Read it carefully to ensure a problem-free installation. Package Contents Before you begin the CopyPoint PC Link installation, please check the contents of your package: One (1) set Software Installation CD-ROM CopyPoint PC Link Cable with 25-pin and 9-pin connector Warranty and Licensing Materials Brother Manual Computer Requirements The following are the minimum computer requirements you need to set up and operate the Copyboard when it is attached to your PC. CPU Pentium 75 or Higher RAM 8MB or greater for Windows® 95 (16MB recommended) 16MB or greater for Windows® 98 and Windows NT® Workstation Version 4.0 (SP3 or later) (32MB recommended) 24MB or greater for Windows® 98 second Edition (32MB recommended) Hard Disk Drive 50MB Full Installation 10MB Twain Driver Installation Operating System Windows® 95/98 or NT® Workstation Version 4.0 Interface RS-232C serial port (9-pin or 25-pin connection) CD-ROM Drive 2X Speed or Higher iv INTRODUCTION