Brother International DreamMaker„ XE Innov-is VE2200 Users Manual - Engl - Page 154
Upper Threading, Preparing the Bobbin Thread
View all Brother International DreamMaker„ XE Innov-is VE2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 154 highlights
PREPARING FOR BOBBIN WORK ■ Upper thread Embroidery thread (polyester thread) or monofilament (transparent nylon) thread. If you do not wish for the upper thread to be visible, we recommend using transparent nylon monofilament thread or polyester light weight thread (50wt. or above) that is the same color as the lower thread. ■ Needle Use a needle appropriate for the upper thread and fabric being used. Refer to "Embroidery Step by Step" on page B-46. ■ Embroidery foot Embroidery foot "W" or embroidery foot with LED pointer "W+" * Included accessories vary depending on the countries or regions. Preparing the Bobbin Thread In order to create bobbin work, the bobbin case must be replaced with the one for bobbin work. Before creating bobbin work, clean the bobbin case and the race. a Raise the needle and embroidery then turn off the machine. foot, and b Remove the embroidery unit. c Grasp both sides of the needle plate cover, and then slide it toward you to remove it. ■ Fabric Be sure to embroider trial patterns on a piece of scrap fabric, which includes the same threads and fabric as what is being used in your project. Note • The results may be affected by the type of fabric used. Before embroidering your project, be sure to embroider trial patterns on a piece of scrap fabric that is the same as the fabric used in the project. Upper Threading a Needle plate cover d Remove the bobbin case. a Bobbin case e Use the cleaning brush included with the machine or a vacuum cleaner to remove any lint and dust from the race and its surrounding area. a Install a needle appropriate for thread and fabric to be used. the upper For details on installing the needle, refer to "CHANGING THE NEEDLE" on page B-45. b Attach the embroidery foot. c Thread the machine with the upper thread. For details on threading the machine, refer to "Upper Threading" on page B-38. a Cleaning brush b Race A-4