Brother International DreamMaker„ XE Innov-is VE2200 Users Manual - Engl - Page 45
Checking the Needle Drop Point, With the Embroidery Foot W, with LED Pointer For Embroidery, foot
View all Brother International DreamMaker„ XE Innov-is VE2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
CHANGING THE EMBROIDERY FOOT a Position the embroidery foot "W+" with LED pointer or "W" on the presser foot bar d Press to unlock all keys and by aligning the notch of the presser foot to the large screw. Side view buttons. → All keys and operation buttons are unlocked, and the previous screen is displayed. B 1 Getting Ready b Hold the embroidery foot your right hand, and then in place with use the included screwdriver to securely tighten the embroidery foot screw. ■ Checking the Needle Drop Point With the Embroidery Foot "W+" with LED Pointer (For Embroidery foot "W+" with LED pointer user only) Before beginning to embroider when using the embroidery foot "W+" with LED pointer, carefully read the procedures described in the "Embroidery" and "Embroidery Edit" chapters. a Press in the embroidery screen. → The LED pointer indicates the needle drop point. → For users of embroidery foot "W", skip step c and go to step d. CAUTION • Use the included screwdriver to firmly tighten the screw of the embroidery foot. If the screw is loose, the needle may strike the embroidery foot and possibly cause injury. c Plug the connector of the embroidery foot "W+" with LED pointer into the jack on the back of your machine. Memo • When the LED pointer is turned on, the presser foot height is automatically adjusted according to the fabric thickness. • If is pressed again, the fabric thickness is remeasured and the presser foot is set to the optimum height. * The LED pointer turns off automatically by lowering the presser foot or returning to the previous page. Note • With bulky fabrics, the position may not be accurate due to the various depths of the fabrics. • With fabric that has a very uneven surface such as quilting, the fabric thickness may not be correctly measured. In this case, the pointer indication should be used only as a reference. Basic operations B-43