Brother International DreamMaker„ XE Innov-is VE2200 Users Manual - Engl - Page 155
Wind a decorative thread around
View all Brother International DreamMaker„ XE Innov-is VE2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 155 highlights
PREPARING FOR BOBBIN WORK f Wipe the bobbin case free cloth to clean it. (gray) with a soft lint h Wind a decorative thread around the bobbin by hand. After winding the bobbin g Insert the bobbin case so that the S mark on the bobbin case aligns with the ● mark on the machine. so it is filled as shown below (about 80%), cut the thread. A 1 How to Create Bobbin Work a b a b For precautions on winding the bobbin for embroidering, refer to step b of "Selecting the Pattern" on page A-8. CAUTION • Be sure to use the machine's included bobbin or one designed specifically for this machine. Using any other bobbin may result in damage or injuries. * Align the S and ● marks. a S mark on the bobbin case b ● mark on the machine c Bobbin case Note • The bobbin case (gray) cannot be used in any way other than bobbin work. After creating bobbin work, refer back to the steps in "Preparing the Bobbin Thread" on page A-4 for removing and cleaning the bobbin case (gray), and then reinstall the standard bobbin case. * Actual size a This model b Other models c 11.5 mm (approx. 7/16 inch) Note • Slowly and evenly wind the thread around the bobbin. • For best results, wind the bobbin so the thread is snug and not twisted. i Using scissors carefully trim the thread as close to the bobbin as possible. tail CAUTION • Be sure to use the bobbin case (gray) when creating bobbin work. Using any other bobbin case may result in the thread becoming tangled or damage to the machine. • Make sure that the bobbin case is correctly installed. If the bobbin case is incorrectly installed, the thread may become tangled or the machine may be damaged. a Beginning of wound thread CAUTION • If thread extends beyond the top of the bobbin too much, the thread may become tangled or the needle may break. Appendix A-5