Brother International Entrepreneur Pro PR-1000 Users Manual - English
Brother International Entrepreneur Pro PR-1000 Manual
View all Brother International Entrepreneur Pro PR-1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Brother International Entrepreneur Pro PR-1000 manual content summary:
- Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 1
Embroidery Machine PR-1000 Operation Manual Product Code: 884-T10 - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 2
Patent Office 5,860,082/6,260,156 FlashFX® Pro™ is a trademark of Datalight, Inc. Datalight procurement of substitute goods or services; loss of use, data, or profits; a trademark of International Business Machines Corporation. Microsoft, Windows and is mentioned in this manual has a Software License - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 3
Introduction Thank you for purchasing this embroidery machine. Before using this machine, carefully read the "Important Safety Instructions", and then study this manual for the correct operation of the various functions. In addition, after you have finished reading this manual, store it where it can - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 4
detaching an embroidery frame or other included accessory or while maintaining the machine, be careful not to hit the machine with your body or any other part of it. 5 Special care is required when sewing: • Always pay close attention to the needle. Do not use bent or damaged needles. • Keep fingers - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 5
, first follow the troubleshooting table in the back of the operation manual to inspect and adjust the machine yourself. If the problem persists, please consult your local authorized Brother dealer. Use this machine only for its intended use as described in the manual. Use accessories recommended by - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 6
children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 7
: (908) 704-1700 declares that the product Product Name: Brother Embroidery Machine Model Number: PR-1000 complies with Part 15 of the FCC Rules. Operation is subject generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 8
BROTHER retains ownership of all rights to CONTENT and to the copies of the CONTENT included in this package. The CONTENT are licensed (not sold) to you ("CUSTOMER") under the terms and conditions of this Agreement. CUSTOMER is licensed to: • Use the CONTENT in combination with an embroidery machine - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 9
Warning Labels The following warning labels are on the machine. Be sure to observe the precautions described in the labels. 1 2 Label locations Please put a drop of oil onto the hook once a day before use. Warning Labels 7 - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 10
the thread colors. With the automatic method (default method when the machine is purchased), needles that are already threaded with a color that will be used in the next pattern are assigned to the same thread color based on the needle bar assignments from the previous pattern in order to reduce the - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 11
sewn within the embroidery). When sewing is finished, the machine stops. If the pattern uses eleven or more thread colors, the machine will stop when it is necessary for the thread spools to be changed, and the corresponding instructions appear on the LCD. (However, when "Manual needle bar sequences - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 12
sticker. (Refer to "Using the built-in camera" on page 103.) ■ For your embroidery business -Link functionYou can send embroidery patterns edited in embroidery editing software provided with the Link function, such as PE-DESIGN NEXT or later, from a computer to an embroidery machine. You can connect - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 13
By connecting a computer to the machine using the included USB cable, embroidery patterns can be transferred from the computer. (Refer to "Computer (USB)" on page 168.) ■ Automatic needle-threading mechanism Using the automatic needle-threading mechanism, each needle can easily be threaded. If - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 14
, it would be convenient to use the manual color sequence. (Refer to "Selecting/Managing Thread Colors for Each Needle Bar (Manual Color Sequence)" on page 132.) ■ Availability of various accessories In addition to the 4 embroidery frames included with the machine, there are 3 optional frames (quilt - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 15
page that is indicated. ■ Searching the machine This machine is equipped with a help feature. Learning how to perform an operation Touch the machine operations guide key, and then check for the desired information. (Refer to "Using the Machine Operations Guide Key" on page 232.) Manual Structure 13 - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 16
...1 IMPORTANT SAFETY INSTRUCTIONS 1 License Agreement ...6 Warning Labels...7 Machine Structure and Features 8 Ten-needle machine embroidering...8 Differences from single-needle machines ...9 Other features ...10 Available features...12 Manual Structure...13 Read before use ...13 Read when - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 17
49 Hooping the fabric in the embroidery frame 49 Attaching the Embroidery Frame to the Machine 51 Attaching the embroidery frame...51 Checking the Embroidery Area 53 Temporarily stopping to check the area ...53 Continuing to the embroidering screen ...53 Upper Threading ...54 Checking the needle - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 18
of the upper thread 123 EMBROIDERING SETTINGS 125 Basting Embroidery ...126 Creating an Appliqué Piece 127 Creating an appliqué piece ...127 Using a frame pattern for the outline ...130 Selecting/Managing Thread Colors for Each Needle Bar (Manual Color Sequence) .... 132 Convenience of the - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 19
the language ...231 Using the Machine Operations Guide Key 232 APPENDIX 235 Appliqué Sewing...236 Sewing appliqué patterns ...236 Using a frame pattern to create appliqués (1 237 Using a frame pattern to create appliqués (2 238 Sewing Large-size (Split) Embroidery Patterns 240 Helpful Tips - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 20
...289 On-screen troubleshooting ...289 Troubleshooting ...290 Error messages ...298 If the machine does not respond when a key is pressed 307 Specifications ...308 Embroidery machine specifications ...308 Upgrading Your Machine's Software 309 Upgrade procedure using USB media ...309 - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 21
24 Setting Up the Machine 26 Setup and transporting precautions 26 Setup location...27 Setting up the machine 28 Remove the fixing plates 29 Adjusting the operation panel position 29 Preparing the thread guide assembly 30 Preparing the spool stand 31 Attaching the embroidery frame holder 32 - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 22
bar case Moves to the left and right to move the needle to the embroidering position. 3 Lower thread guide 4 Carriage Attach the embroidery frame to the carriage. When the machine is turned on or when the machine is embroidering, the carriage moves forward, backward, left and right. 5 Hook cover - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 23
In order to import/export patterns between a computer and the machine, plug the USB cable into the USB port. 4 Touch pen holder Use the touch pen holder to hold the touch pen when not in use. 5 Handwheel Rotate the handwheel to move the needle up and down. Be sure to rotate the handwheel toward - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 24
accessories listed below are included with this machine. Make sure to use the accessories designed for this machine. Included accessories After opening the box, check that the following accessories are included. If any item is missing or damaged, contact your Brother dealer. Part Name Part Code - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 25
corner cover) XC7134-051 22. Spool cap × 10 XE7374-001 1 34. Embroidery frame holder B (with light gray corner cover) 130012-054 23. USB cable XE7376-001 35. Operation Manual XD1851-051 This manual 24. Embroidery frame (extra-large) 36. Quick reference guide 200 mm (H) × 360 mm - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 26
PRPCF1 (USA/CANADA) PRPCF1: XE8408-001 (Other area) 2. Wide cap frame 10. 60 mm (H) × 360 mm (W) (2-3/8 inches (H) × 14 inches (W)) ) (6 inches)) PRPRF160 (USA/CANADA) PRPRF160: XE8433-001 (Other area) Embroidery frame holder C (with dark gray corner covers) PRPARMC (USA/CANADA) PRPARMC - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 27
nearest Brother dealer for a large) 200 mm (H) × 300 mm (W) (7-7/8 inches (H) × 11-3/4 inches (W)) PRH300 (USA/CANADA) complete listing of optional accessories and embroidery cards available for your machine. 1 PRH300: XC6284-052 (Other area) 19. Metal bobbin Memo ● Always use accessories - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 28
use the machine in a location where it will be exposed to direct sunlight, otherwise the machine may malfunction. ● Set up the machine with it's four adjustable feet completely in contact with the desk or table, so that the machine is level. ● Do not put anything under the embroidery machine that - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 29
• Place no objects within the moving range of the embroidery frame 1 • Set-up machine near an electrical outlet • Use a level and stable surface, such as a desk or stand. • Use a surface that can support the weight of the machine (about 42 kg (92 lb)) • Allow open space around the ventilation - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 30
is level. After adjusting the legs to the desired length, 5 use the included wrench to tighten the nuts. 1 Lock nut 2 Adjustable foot nut X The foot can be turned. 1 Lock nut Press down on each corner of the 6 embroidery machine to check that it is stable. If it is still unstable, perform steps - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 31
-to2 operate position, and then tighten the thumb screws. 1 Screws 2 Fixing plates Memo ● After removing the fixing plates, be sure to keep them to be used again. Before transporting the machine, consult your authorized Brother dealer. Setting Up the - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 32
guide assembly Raise the thread guide assembly. CAUTION ● When setting up the thread guide assembly, set it up with the needle bar 6 position selected, otherwise the machine top of the 1 thread guide assembly support. (Side view) 1 Thumb screws (Top view) Note ● Using the disc-shaped screwdriver - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 33
assembly support. Do not apply extreme force when moving the thread guide assembly support. Be sure that the thumb screws are loosened well enough before moving the part. ● Be sure to tighten each thumb screw well enough that the thread guide assembly support is secured. Setting Up the Machine 31 - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 34
screwdriver included, firmly tighten the thumb screws. ● Two types of embroidery frame holders are included with this machine. Embroidery frame holder A is used with the four included embroidery frames. (Refer to "Correctly Using the Embroidery Frames" on page 90 for the details.) This completes the - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 35
the Embroidery Frame 49 Hooping the fabric in the embroidery frame 49 8.Attaching the Embroidery Frame to the Machine 51 Attaching the embroidery frame...... 51 9.Checking the Embroidery Area........ 53 Temporarily stopping to check the area 53 Continuing to the embroidering screen 53 10.Upper - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 36
embroidery machine and unplug the power supply cord, otherwise a fire, an electric shock or damage to the machine may result. • When you are away from the machine. • After using the machine. • If a power outage occurs while the machine servicing the machine or when removing covers, the machine must - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 37
the correct choice of needle for your machine. CAUTION ● Your machine is designed to use household embroidery needles. The factory recommended needle is "HAX 130 EBBR" (Organ). Schmetz needles 130/705 H-E may be used as a substitute. Use of any other needles may break the needle or thread or - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 38
used (120 den x 2 / 135 dtex x 2 / 40 weight (in Americas and Europe) / #50 (in Japan)). Fabric recommendations Be sure to observe the following recommendations concerning the fabric. Note ● Your machine can embroider fabric that is up to 1 mm (1/16 inch) thick. If thicker fabric is sewn, the needle - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 39
Hoop the fabric in the embroidery frame. p. 49 p. 36 8 Attach the embroidery frame to the machine. p. 51 9 Check the embroidery area. p. 53 10 Thread the upper threads. p. 54 p.36 Unlock the machine in the tables on pages 71 to 80. Use these tables for quick reference. The various - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 40
pull it with extreme force. 38 Note ● Put a drop of oil onto the hook once a day before use. Installing the bobbin Memo ● This embroidery machine is not equipped with a bobbin-winder. Use pre-wound (L type) bobbins. ● The optional bobbin winder (stand-alone type) and optional metal bobbins can also - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 41
off the bobbin clockwise as shown in the illustration. If the bobbin is installed with the thread winding off in the opposite direction, the embroidery will not be sewn correctly. Pass the thread through the thread slit and 2 under the tension-adjusting spring. 1 Tab 2 Notch Fully insert the bobbin - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 42
embroidery machine. For precautions concerning the power supply, refer to page 34. CAUTION When the machine is turned on, the opening 4 movie is played. Touch anywhere on the ● Be sure to use needle bar is not already at the embroidering position, the needle bar case moves and the number 1 needle - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 43
move or thread a selected needle bar, or to position the carriage so the embroidery frame can easily be removed or attached. p.30, 62, 90 6 Settings key Touch this key to change the embroidery machine settings. p. 218 * The keys in the table above appear and can be used in most of the screens - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 44
settings screen. In the embroidering settings screen, if it is a combined pattern, edit the entire pattern, specify the embroidering settings and check the embroidery area. (Refer to page 47, 76.) 1 2 1 Touch this key to return to the pattern type selection screen. 2 Touch this key to continue - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 45
In the embroidering screen, check the thread colors assigned to the needle bars, and then install the upper threads. Touch to unlock the machine so that the start/stop button starts flashing in green. The embroidery machine is now ready to begin sewing. 2 1 2 1 Touch this key to return to - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 46
EMBROIDERING TUTORIAL 3. Selecting an Embroidery Pattern As an example, we will select the pattern shown at the right. In the pattern type selection screen, select a pattern category (type). Pattern type - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 47
to select a different pattern, touch the desired pattern. Touch 4 to display the next screen. This confirms the pattern selection. X The pattern editing screen appears. X The pattern list screen appears. Touch the desired pattern. 3 In this case, touch . Selecting an Embroidery Pattern 45 - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 48
the next screen. 2 Continuing to the embroidering settings screen Press . 3 1 8 4 5 9 6 1 Shows the size of the embroidery pattern embroidery frames that can be used to sew the currently selected embroidery pattern. Memo ● If the embroidery frame holder is not attached to the machine, - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 49
later use. embroidery area. 6 Touch to check the needle drop point on the LCD screen. 7 Touch these keys to specify how the pattern will be embroidered. 8 Touch to store the pattern in memory. 9 Continues to the next next operation. Note ● Available keys are not the same if you set 2 "Manual - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 50
frame holder, and then select the embroidery frame you are going to use. Touch . 1 X The preview image is displayed. • If you find out the type of embroidery frame holder and size of embroidery frame which are best for your embroidery, select the display guides in the settings screen for your - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 51
indicated in the screen, select the embroidery frame that you wish to use. Embroidery frames that can be used appear lighter ( ) embroidery frames that cannot be used appear darker ( ). Memo ● If the embroidery frame holder is not attached to the machine, the embroidering area will not display - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 52
depending on the type of fabric being embroidered. Try various methods to achieve the best embroidering results. (Refer to "Hooping techniques" on page 249.) Memo ● This embroidery machine can also be used with the optional cap frames. (Refer to "Using the Optional Cap Frame" on page 258.) 50 - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 53
Machine After hooping the fabric in the embroidery frame, attach the frame to the embroidery machine. Embroidery frame holders A and B are included accessories with this machine. Install embroidery frame holder A when an included embroidery frame is to be used. (See "Correctly Using the Embroidery - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 54
● Please firmly tighten the two thumb screws with included disc-shaped screwdriver. The machine will recognize the wrong frame size, if the two screws are not tightened. X The embroidery frame holder is ready for the embroidery frame to be attached. • The inner frame should be on top. Note ● Attach - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 55
frame stops moving, and 2 the next screen appears. in use catching on the fabric outside of the design area. Try to stitch the design as close to the center of the embroidery frame, using needle bars 3 through 7, keeping the head of the machine as centered as possible. (Refer to page - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 56
spools from the previous embroidery project need to be changed. If you set "Manual Color Sequence" to "ON" in the settings screen, the message does not appear even if the thread spools need to be changed. (Refer to "Selecting/Managing Thread Colors for Each Needle Bar (Manual Color Sequence)" on - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 57
unlock 1 the machine, and then press the start/stop button. 2 6 Touch a key to move the selected needle bar to the sewing position. Use when threading the needle with the automatic needle-threading mechanism. 6 3 Note ● Available keys are not the same if you set 4 "Manual Color Sequence - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 58
the upper thread, carefully follow the instructions. If the upper threading is not performing correctly, the thread may break or become tangled, causing the needle to bend or break. Note ● It is recommended that rayon or polyester machine embroidery thread be used (120 den/2, 135 dtex/2, 40 weight - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 59
of a specified color through 2 the holes on the thread guide, making sure that you have the thread color matched to the coordinating needle bar. Pass the thread from spool pins 1, 3, 5, 6, 8 and 10 through the holes in both thread guides A and B. Pass the thread from spool pins 2, 4, 7 and 9 through - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 60
and 7 around the correct thread guide pins as indicated on the machine, then slip the thread under the number 1 middle thread guide plate from the right. 1 Upper thread guide plate 58 1 Thread guide pin 2 Middle thread guide • The path from the upper thread guide around the thread tension disc and - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 61
1 take-up lever hole from right to left. 1 Hole in lower thread guide Use the included threader to pass the thread 0 into the number 1 needle bar thread guide. 1 Thread take-up lever 1 Needle bar thread guide 2 Needle changing tool (Threader) When all upper threading is complete, be a sure to - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 62
bar that you want to thread is positioned as the sewing position, otherwise the automatic needlethreading mechanism cannot be used at the particular needle. If the needle bar is not at the sewing position, move it there. (Refer to page 62.) Pull out about 150 mm (6 inches) of thread. 2 Allow thread - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 63
Pass the thread under the guide on the 3 presser foot. Press the automatic needle-threading 5 button. 1 Guide on presser foot 2 Notch in guide on presser foot • Make sure that the thread securely passes through the notch in the guide on the presser foot. Securely pass the thread through the - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 64
. Touch the key for the needle bar that you 2 wish to move or thread. Touch 4 screen. to return to the previous Memo ● In the embroidering screen, a blue frame appears around the thread information box of the selected needle bar. X The selected needle bar moves to the position of embroidery. 62 - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 65
embroidery You can move the needle bar in the embroidering screen. Touch the key for the needle bar that you 1 wish to thread. ■ Using the spool net When using being used between the spool and the thread guide above the spool. Place the new spool on the spool pin and tie the end of the new thread - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 66
when the end of the stitching is reached. CAUTION ● For safety reasons, the embroidery machine must not be left unattended while it is sewing. ● While the machine is in operation, pay special attention to the needle location. In addition, keep your hands away from all moving parts such as the - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 67
soon be used for sewing appears at the top of the thread color sequence display. The remaining thread colors are listed in the sewing order, starting from the top. 2 A blue frame appears around the thread information box of the needle bar currently being selected. • While the embroidery machine is - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 68
button. Memo ● If the Reserve Stop key is touched while embroidery is being sewn, the machine stops sewing before the next color begins. (Refer to "Stopping the machine at the next color change" on page 140.) ● Before starting to sew, the machine can be set to stop at any thread color change. (Refer - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 69
is not trimmed. Touch 2 machine. to unlock the embroidery Press the thread trimming button. 3 X The embroidery machine is turned off and the display thread breaks while sewing If a problem occurs while sewing, such as if the thread breaks, the machine stops automatically. Re-thread the broken - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 70
the first 100 stitches of each color sewn with each needle bar. ● The resulting embroidery may not appear as expected, due to the type or material used. Be sure to sew a trial embroidery before sewing on your project. Memo ● In the built-in embroidery patterns, one pattern is used for checking - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 71
is lit in red. If the start/stop button is flashing in green, the machine may start sewing. If the machine accidentally starts operating, injuries may result. ● When removing the embroidery frame, be careful that the embroidery frame Removing the fabric does not hit any other part of the - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 72
is turned off while it is sewing, embroidering can continue when the machine is turned on again. (Refer to "Resume Embroidering After Turning Off the Machine" on page 120.) Turned off while embroidering X The embroidery machine is turned off and the display and the start/stop button indicator goes - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 73
. guide key p.232 Touch this key to 4 change the embroidery machine p.218 Settings key settings. Touch this key to cancel all operations 5 previously performed and return to the Home key initial pattern group selection screen. Touch this key to move or thread a selected needle bar - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 74
sizes. p.164 8 Greek alphabet key Greek uppercase letters. p.165 By using the included USB cable to connect a 9 Computer (USB) key computer to the embroidery machine, patterns can be recalled from the computer. p.168 1 Embroidery pattern key 2 Frame pattern key 3 Floral alphabet key The - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 75
key 2 7 3 8 9 Touch this key to Next page display the next page. p.153 key 9 Allows the size of the 0 A B 0 currently selected embroidery pattern to p.160 Size key be changed. 4 colors for the thread currently selected colors embroidery pattern. Screen Quick Reference Guide 73 - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 76
combined, the size of the entire pattern, including all patterns, is shown. Shows the sizes of embroidery frames that 2 Embroidery frame indicators can be used to sew the embroidery pattern currently displayed in the pattern display area. p.49 Shows the vertical 3 length of the pattern - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 77
color of each character 4 in an alphabet pattern Multi Color key to be changed; can only be used when an alphabet is selected. p.190 Changes the orientation of the 5 characters in the p.186 p.190 p.192 8 Duplicates the pattern. p.203 Duplicate key Screen Quick Reference Guide 75 - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 78
checked and a pattern can be saved for later use. Keys available in this screen differ when you set "Manual Color Sequence" to "ON" in settings screen pattern. Shows the sizes of embroidery frames that can be used to 3 Embroidery sew the embroidery frame pattern currently indicators displayed in - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 79
the needle 0 position at the Starting/ beginning of sewing ending and at the end. position key p.135 Moves the embroidery A p.53 Touch to align the 4 embroidering position Positioning key using the machine's built-in camera. p.105 • The functions and operations Quick Reference Guide 77 - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 80
3 4 5 Display No. Key Name Function Page This illustration appears when the sewing 1 Manual machine is in the p.132 color "Manual Color sequence Sequence" mode. mode icon Touch to view the needle drop point from 2 the LCD screen without p.103 Camera actually lowering the view key - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 81
the needle bar settings can be specified, and the needle placement forward or backward can be done. Keys available in this screen differ when you set "Manual being sewn. Shows the amount of time until the machine will stop. When the last thread spool is being sewn, the number Guide 79 - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 82
3 7 4 8 5 Display No. Key Name Function While sewing embroidery, touch 1 this key for the Reserve Stop machine to stop key prior to the next color beginning. Page p.140 Enables the needle 2 bar settings to Temporary manually be p.142 needle bar specified. settings key Change the - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 83
format. information, therefore the embroidery machine automatically assigns colors when a Tajima Use USB media to transfer the data to the machine. 2 (.dst) file is loaded. (Refer to page 246.) Using the USB cable, the data can be transferred ■ Needle number The needles are numbered from right - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 84
functions using the USB ports on the machine. Connect the appropriate devices according to the feature of each ports. 1 Upper thread guide plates -BASIC, you can plug the included USB card writer module into the machine as an embroidery card reader, and recall patterns. 2 USB port for mouse (USB1.1) - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 85
patterns cannot be saved from the machine to an embroidery card inserted into a connected USB card writer module. Memo ● USB media is widely used, however some USB media may not be usable with this machine. Please visit our website (http:// solutions.brother.com) for more details. ● Depending on - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 86
a USB mouse The USB mouse, connected to the sewing machine, can be used to perform a variety of operations in the screens. Connect a USB mouse to the USB 1.1 port marked with . You can also connect a USB mouse to the - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 87
bar for additional pages are displayed, rotate the mouse wheel or click the left mouse button with the pointer on / to display the previous or next page. 2 When You Have a Question, This May Help You 85 - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 88
enlarge the pattern in the same way as when is touched. Rotate the pattern. 2 • Rotate the mouse wheel away from you to rotate the pattern 10 degrees to the left in the same way as when is touched. • Rotate the mouse wheel toward you to rotate the pattern - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 89
Needle 88 Replacing the needle 88 Correctly Using the Embroidery Frames 90 Embroidery frame holders 90 When difficult to replace the embroidery frame 90 Types of embroidery frames/frame holders and their applications 91 Attaching Iron-On Stabilizer (Backing) to Fabric 93 Hooping Machine 120 - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 90
is broken, replace the needle with a new one. Use the included Allen screw driver to replace the needle with one that is designed specifically for this machine and that passes the test described in "Checking the needle" on page 35. Replacing the needle Turn off the embroidery machine. 1 • Do not - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 91
. Use the Allen screw driver to turn the needle set screw clockwise. 3 CAUTION ● Be sure to insert the needle in the needle bar chamber until it reaches the needle bar stopper and securely tighten the needle set screw with the Allen screw driver, otherwise the needle may break or the machine may - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 92
Various types of embroidery frames can be used with this machine to suit your project. In addition to the four included embroidery frames, there are many frames that can be used with this embroidery machine. (Refer to "Optional accessories" on page 24.) CAUTION ● Only use embroidery frames of the - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 93
thick garments. Consult your nearest Brother dealer. Large embroidery frame 130 mm (H) × 180 mm (W) (5-1/8 inches (H) × 7-1/8 inches (W)) Use when embroidering patterns with a size less than 130 mm (H) × 180 mm (W) (5-1/8 inches (H) × 7-1/8 inches (W)) (Refer to "Hooping the Fabric" on page 94 - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 94
, the pattern may be misaligned or the fabric may pucker. ● All genuine embroidery frames that can be used with PR-600, PR-600II, PR-620 and PR-650 can be installed on this machine. ● When sewing with a following optional embroidery frame; jumbo frame, border frame, quilt frame or flat frame, the - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 95
that is not stiff. ● When embroidering fabric with a nap, such as towels or corduroy, hoop a layer of iron-on stabilizer (backing) under the fabric in the embroidery frame without ironing it. ● For other uses of stabilizer (backing), refer to "Stabilizers (backing)" on page 247. Attaching Iron-On - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 96
frame. 3 First insert the inner frame at the corner with the screw A, next insert the nearby one corner B, and then insert the opposite corner C. Then insert the fabric in the embroidery frame, we recommend using a flat surface. ● Refer to "Hooping fabric in the small embroidery frame" on page 50 for - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 97
sheet In order to hoop the fabric so that the pattern will be sewn in the correct position, use the guidelines on the embroidery sheet to accurately stretch the fabric in the frame. Press the inner frame into the outer frame. 4 Remove the embroidery sheet. With a fabric marker, mark the area - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 98
When embroidering pieces of fabric that are smaller than the embroidery frame, use spray fabric adhesive to attach the fabric to stabilizer (backing) hooped in the embroidery frame. With fabrics where you do not wish to use spray adhesive, baste the fabric to the stabilizer (backing). 1 Fabric - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 99
provides information concerning the embroidery frame when operating the embroidery machine. ■ Embroidery frames that cannot be used for embroidering As explained on page 49, the embroidery frame indicators at the top of the screen show the embroidery frames that can be used to sew the currently - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 100
frame at the correct position 2 Needle position when the embroidery frame is replaced In order to correct the misalignment of this embroidery frame, the embroidery frame automatically moves to the correct position when any of the following are performed. • The embroidery machine is turned on. The - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 101
embroidery machine is purchased, it was adjusted so that the beginning of the stitching was from the center of the pattern. Therefore, move the frame and adjust the embroidering position so that the center of the pattern aligns with the needle cannot be hooped evenly within the embroidery frame and - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 102
presser foot are locked in the down position. Touch the arrow keys in the embroidery 2 settings screen to move the embroidery frame so that the needle drop point is at the center of the area where you wish to embroider. • With a USB mouse, your finger or the touch pen, drag the - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 103
. Each touch of a key rotates the pattern. 1 Example: Original angle Rotates 90 degrees to the right Rotates 10 degrees to the right Rotates 1 degree to the right Rotates 90 degrees to the left Rotates 10 degrees to the left Rotates 1 degree to the left Moves the pattern in the direction of the - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 104
is particularly useful when embroidering items, such as bags and tubular items, that have limitations to being hooped in the embroidery frame. Example . Pass the machine bed through from the waist of the T-shirt, not from the neck, and attach the embroidery frame to the machine. This will prevent - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 105
The camera built into this machine can be used to easily align the embroidering position. This is useful for patterns which need to be embroidered in particular position as shown below. Note ● When hooping the fabric in the embroidery frame, make sure that the embroidery pattern will fit within the - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 106
Touch to enlarge the camera view. By enlarging the camera view, you can make a close adjustment for the center point of the pattern moving the embroidery frame little by little. Touch and adjust the orientation of the 0 pattern until the grid lines are parallel with the chalk mark drawn on the - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 107
sticker to select it. Note ● When hooping the fabric in the embroidery frame, make sure that the embroidery pattern will fit within the embroidering area of the frame being used. 1 1 Embroidering area 2 Embroidery pattern size 3 Embroidery positioning sticker ● Depending on the type of - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 108
fabric. Use tape to firmly affix the sticker to the fabric. ● When using the optional cap frame or cylinder frame, attach the embroidery positioning is selected. When the machine's built-in camera has 6 finished detecting the location of the embroidery positioning sticker, the following message - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 109
, and then press the start/ 0 stop button to start embroidering. Note ● After all of the included embroidery positioning stickers have been used, new ones can be purchased separately. When purchasing new ones, check "Optional accessories" on page 24 for the part code, and then contact your nearest - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 110
spool stand thread color position. Memo ● This function is not available when you set "Manual Color Sequence" to "ON" in settings screen. Touch the number of the other needle bar 3 that will be switched. The two needle numbers are connected with an arrow. • To cancel the selection, touch the same - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 111
is in the middle of the embroidery. Touch . 1 3 X The thread color setting is canceled. Touch . 2 X Thread colors are assigned by the machine again, regardless of the previous spool setting. Note ● This function will not clear anchor settings of any of the needles which have been assigned - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 112
. When changing the thread spools, instruction to change the thread spools will appear with the machine automatically stopping. Memo ● This function is not available when you set "Manual Color Sequence" to "ON" in settings screen. ■ Assignment of thread colors to needle bars Thread colors are - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 113
number of thread changes can be viewed, however, which thread colors are used in the pattern cannot be checked on this screen. Whether or not the machine stops. X The stitch navigating screen appears. Touch . 1 2 1 Time until the machine stops X Each time this key is touched, the next color - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 114
OTHER BASIC PROCEDURES Check the position of . 3 1 2 1 indicates when the thread spools will need to be changed. The thread spools will need to be changed the number of times that this indicator is displayed and between the two thread colors at the point where it is displayed. 2 Touch - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 115
"Manual machine automatically stops 3 1 Flashing in white, then lights up with the next new thread color. Refer to "Moving and threading a selected needle bar" on page 62. ● When the embroidering screen appears, the needle bar settings are saved. ● If the needle bar settings are saved and the next - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 116
out the old thread just after the needle 4 bar thread guide. Change the thread spool. 2 114 Continue pulling the thread until the knot is above the needle. Cut the knot. Use the automatic needle-threading 5 mechanism to thread the needle with the new thread. (Refer to page 60.) X This completes - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 117
to check the needle drop 3 point on the LCD screen. ● If the thread sensor is turned off, the machine does not stop embroidery frame moves at the same time. 3 Memo ● When the thread breaks or the bobbin thread runs out while embroidering, the spool stand LEDs flash to notify you of the problem - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 118
Touch . 6 was last stitched, by touching the or , the embroidery frame will move, allowing you to place the cross mark directly on 7 stop button to continue embroidering. 1 Stitch line 2 Cross mark If the needle bar is moved back too far through the stitching, touch or to go forward - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 119
be cleanly removed, trim the thread with scissors. • If the hook cover can be opened, replace the bobbin without removing the 3 embroidery frame from the machine. • If the machine bed is hidden, for example, with a bag-shaped piece of fabric, or if the hook cover cannot be opened, temporarily - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 120
trial embroidery was sewn and an incorrect thread tension was used or if the wrong thread color was used, restart the embroidering using the the embroidery frame moves at the same time. Touch to check the needle drop 3 point on the LCD screen. Press the start/stop button to stop the 1 machine. - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 121
The needle bar case moves and the current needle bar moves to the sewing 3 position, and then the embroidery frame moves and current needle position color. Each touch of this key advances to the beginning of sewing the next thread color. Each touch of this key moves one stitch back through the - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 122
power outage, while it was embroidering. The remainder of the embroidery can be sewn when the machine is turned on again; however, some of the stitches that screen to select a new pattern. 2 Touch to continue embroidering. X The embroidering screen displayed before the machine was turned off appears. - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 123
when the thread color is changed. (For details, refer to "Setting the Machine to Stop at Color Changes" on page 140.) 1 1 Each touch of this key moves one stitch back through the stitching. • Check that the needle drop point is positioned where stitches have already been sewn. Touch . 8 Resume - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 124
to adjust the thread tension if the correct thread tension as described on page 68 was not used. After adjusting the tension of the bobbin thread, adjust the tension of the upper thread for each needle bar. Note ● Be sure to check the tension of the bobbin thread each time that the - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 125
try 4 embroidering with all needle bars to check the thread tension. Memo ● In the built-in embroidery patterns, one pattern is used for checking the thread ● If the thread tension setting is made 3 extremely weak, the machine may stop during sewing. This is not the sign of a malfunction - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 126
OTHER BASIC PROCEDURES ■ Upper thread is too tight The tension of the upper thread is too tight, resulting in the bobbin thread being visible from the right side of the fabric. ■ Upper thread is too loose The tension of the upper thread is too loose, resulting in a loose upper thread, loose - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 127
make operation easier. Basting Embroidery 126 Creating an Appliqué Piece 127 Creating an appliqué piece 127 Using a frame pattern for the outline 130 Selecting/Managing Thread Colors for Each Needle Bar (Manual Color Sequence) ........132 Convenience of the manual color sequence 132 Specifying - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 128
SETTINGS Basting Embroidery Before embroidering, basting stitches can be sewn along the outline of the pattern. This is useful for farther the basting is from the pattern. ● The setting remains selected even if the machine is turned off. Note ● When is pressed, the pattern is moved to the - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 129
embroidery cards. This is convenient for fabrics that cannot be embroidered or when you wish to attach an appliqué to a garment. Creating an appliqué piece The following pattern will be used to create an appliqué piece. Use Embroidering area 2 Approx. 10 mm 3 Pattern size Touch , and then - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 130
stick a piece of stabilizer to the back 6 of the felt or denim fabric to be used as the appliqué piece. Hoop the appliqué fabric in the embroidery 7 frame, attach the embroidery frame to the machine, and then start embroidering. After the cutting line "APPLIQUE 8 MATERIAL" is embroidered, stop the - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 131
cutting line, otherwise the appliqué fabric will not be caught by the appliqué stitch. Use two layers of adhesive water-soluble 0 stabilizer material with their sticky sides together, and then hoop them in the embroidery frame. Lightly apply glue or spray adhesive, and b paste the appliqué piece so - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 132
● Some glue may get onto the presser foot, needle, and needle plate at this time. Finish embroidering the appliqué pattern, and then clean off the glue. Using a frame pattern for the outline Instead of having a multi-step appliqué created by following the embroidery image, you can create a shape to - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 133
Touch 5 setting. to select the appliqué piece Touch . 6 Use 7 to select the frame pattern, 4 and then touch and . X The frame pattern is deleted. Touch to continue to the 8 embroidering settings screen. Touch to continue - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 134
can be assigned to needle bars automatically and more efficiently than when the settings are normally specified. Convenience of the manual color sequence The manual color sequence is convenient when the machine is being used under the following conditions. ■ When using embroidery data that has no - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 135
this machine, sewing can continue more efficiently simply by changing the needle bar assignments after a pattern is selected. With the normal method of specifying settings, only a maximum of 9 needle bars can be manually assigned thread colors; however, with the manual color sequence, all 10 needle - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 136
thread color change, and before trimming the thread. When the embroidery machine is purchased, this function is set ON. ■ Specifying that lock turn it off. The setting specified before the machine is turned off remains selected the next time that the machine is turned on. ● If "Thread Trimming" - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 137
used to repeatedly sew a pattern along a diagonal. The starting/ending position settings are specified from the embroidering settings screen. When the embroidery machine new setting is touched. The settings specified before the machine is turned off remain selected the next time that the machine is - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 138
is finished, the machine 3 stops at the lower-right corner of the pattern. For the starting position, touch changes to . For the ending position, touch changes to . so that it so that it Touch and repeat steps 2 and 3 4 three times. Note ● If the next embroidery pattern of the series - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 139
the starting point to the center of the pattern, touch . ● Use to select a different starting point for embroidering. Select the character patterns 3 X The needle bar is positioned in the lowerleft corner of the pattern. The embroidery frame moves so that the needle is positioned correctly - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 140
touch 8 . Use a to align the needle with the end of embroidering for the previous pattern. • Touch to check the needle drop point on needle over the end of the previous pattern. X The needle bar is positioned in the lowerleft corner of the pattern. The embroidery frame moves so that the needle - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 141
400 and 1000 spm. If the cap frame or the cylinder frame is used, the maximum embroidery is being sewn. ● The maximum sewing speed setting does not change until a new setting is selected. The setting specified before the machine is turned off remains selected the next time that the machine - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 142
needle bar moves into position and the machine stops before sewing the next color. X changes back to . • If the machine is temporarily turned off, you will be asked if you wish to continue sewing or select a new pattern when the machine is turned on again. Touch to continue embroidering - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 143
was turned off are not cancelled. However, the settings are cancelled if a new pattern is selected. ● If a pattern with the settings to stop the machine at color changes is saved, the settings to stop the machine at color changes are also saved. 4 1 mark Repeat steps 2 and 3 for each - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 144
Bar Setting After embroidering begins, the machine can be stopped at a color change and a different needle bar can be specified for the next color to be sewn. By substituting an upper thread color already threaded on a different needle bar, the time for sewing can be saved. For example, similar - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 145
same color 2 or when the same pattern is sewn the next time, the area is sewn with the original color. X The temporary needle bar setting screen appears. ● The thread color (needle bar) can be changed with this procedure even when the machine has been stopped with a specified pause or at the - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 146
. Memo ● Even if uninterrupted embroidering has been set, the DST thread trimming function can be used (refer to page 225). ● You can select the needle bar on the embroidering screen, even after touching in step 4. ● After finishing the embroidery, uninterrupted embroidery will be canceled. 144 - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 147
color can be manually assigned to a certain needle bar. If a needle bar is specified, that needle bar is removed from the machine's automatic assignments and the specified color remains assigned to it. By specifically assigning often used thread colors to certain needle bars, the trouble of changing - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 148
until the color that you wish to select from the thread table appears enlarged. 2 Touch or to set the maximum 5 sewing speed for the assigned needle bar. 1 1 1 Value of maximum sewing speed setting 1 The color that appears enlarged is the color that is selected. 2 Displays the color that is - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 149
then select the new setting. Touch any of the key from to for the 1 number of the needle bar whose setting you wish to cancel. 1 1 Indicates the number of the selected needle bar 4 Touch . 2 1 1 The anchor disappears from the thread spool. X This cancels the manual needle bar setting. Memo - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 150
EMBROIDERING SETTINGS 148 - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 151
patterns 162 Renaissance alphabet patterns ...... 163 Appliqué alphabet 164 Greek alphabet patterns 165 Embroidery patterns stored in the machine memory 165 Embroidery cards (optional 166 Computer (USB 168 Connecting the USB using the included USB cord clamps 171 USB media 173 Sending - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 152
/EDITING/SAVING PATTERNS Precautions Concerning embroidery data Observe the following precautions when using embroidery data other than that created and saved in this machine. CAUTION ● While using embroidery data other than our original patterns, the thread or needle may break when sewing with - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 153
the preview and change the thread colors as desired. For more details, refer to page 246. • You cannot select .dst data to send from a computer using the Link function. (Refer to the "Sending Embroidery Patterns From a Computer to the Machine (Link Function)" on page 176. Precautions 151 - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 154
may not be usable with this machine. Please visit our web site "http://solutions.brother.com" for more details. • Only remove USB media while an access lamp on the USB media is not flashing (refer to page 173). • For additional information, refer to the instruction manual included with the USB media - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 155
appears 2 next, touch the desired pattern to select it. ■ Pattern list screen 5 1 2 6 7 3 4 8 9 0 A 1 Embroidery patterns 2 Monogram and frame pattern 7 Appliqué alphabet 8 Greek alphabet patterns 9 Embroidery patterns stored in the machine's memory 0 USB media A Computer (USB) 2 3 4 5 - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 156
appears as multiple stacked keys, a sub-category can be selected. Touch the key for the subcategory containing the desired pattern. Select an embroidery pattern category. 2 Touch the desired pattern. • If the wrong pattern was selected or you wish to select a different pattern, touch the desired - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 157
sewing order follows the order in which the parts of the monogram are selected. For this example, we will select the letters first. Selecting an Embroidery Pattern 155 - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 158
number of letters can be entered. If too many letters are selected, touch to delete the letters. ● If desired, multiple letters can be selected to use these characters in the same way as any other alphabet pattern without creating a monogram. 156 - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 159
touch until the character is the desired size. • The next character that is selected will have the new character size. • The character size of all entered . 9 Touch the desired pattern. X The pattern editing screen appears. 5 Next, we will combine the letters with a frame. Touch . 6 X The - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 160
to group this combined pattern. (Refer to "Editing patterns as a group" on page 204.) Memo ● Due to size or shape, some frame patterns cannot be used with the design. ● The frame patterns are just some of the patterns that can be - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 161
change the character font, touch to return to the font selection screen. Enter "L". 4 5 • Touch or selections. for additional X The text input screen appears. Selecting an Embroidery Pattern 159 - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 162
touch 5 to change the size of the character. Touch 6 and enter "ucky". 1 1 Touch this key to change the size. • The next characters that are selected will have the new character size. • The character size of all entered characters cannot be changed after the characters are combined. (The size of - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 163
the text input screen. After entering all of the text as desired, b touch . 5 This confirms the pattern selection. X The pattern editing screen appears. Selecting an Embroidery Pattern 161 - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 164
of the curve (makes it more curved). • If the text is arranged using one of the text arrangements on this screen, even more characters can be entered. X The list of floral alphabet patterns appears. Select an embroidery pattern. 2 Touch the desired pattern. X The selected pattern appears in the - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 165
selection. X The pattern editing screen appears. Renaissance alphabet patterns Touch . 1 X The list of Renaissance alphabet patterns appears. Select an embroidery pattern. 2 Touch the desired pattern. • If the wrong pattern was selected or you wish to select a different pattern, touch the - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 166
16 inches) 2 Medium: about 68mm (2-11/16 inches) 3 Small: about 49mm (1-15/16 inches) X The list of appliqué alphabet patterns appears. Select an embroidery pattern. 3 Touch the desired pattern. • If the wrong pattern was selected or you wish to select a different pattern, touch the desired pattern - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 167
Greek alphabet patterns Touch . 1 Touch . 3 This confirms the pattern selection. X The pattern editing screen appears. Embroidery patterns stored in the machine memory Embroidery patterns stored in the machine memory can be recalled. For details on storing a pattern, refer to "Saving - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 168
Lite or PED-BASIC, you can plug the included USB card writer module into the machine as an embroidery card reader, and recall patterns. ■ Using embroidery card reader When using the embroidery card reader, carefully support the embroidery card reader near the operation panel. Plug the optional - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 169
card reader/USB card writer module* inserted first is detected. ● If an embroidery card other than our original embroidery cards are used, the embroidery machine may not operate correctly. Be sure to use only recommended embroidery cards. ● Some licensed or copyright cards may not be compatible with - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 170
machine. Computer (USB) Using the included USB cable, the embroidery machine can be connected to your computer, and the embroidery patterns saved on the computer can be temporarily recalled and used from the machine. Also, this machine to the instruction manual for the corresponding equipment. 168 - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 171
. ● While the machine is sewing, do not write data to or delete data from "Removable Disk". 5 X The selected pattern appears in the pattern display area. • If the wrong pattern was selected or you wish to select a different pattern, touch the desired pattern. Selecting an Embroidery Pattern 169 - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 172
Patterns" on page 240. • To add a pattern from the computer, repeat step 1. X The following screen appears while data is written to the embroidery machine, and the key for that pattern appears when writing is finished. ■ If the desired pattern cannot be recalled When recalling pattern data from the - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 173
the screen. If the desired pattern can still not be written, 3 repeat steps 1 and 2. Connecting the USB using the included USB cord clamps When connecting the embroidery machine to a computer, use the included USB cord clamps to keep the cord away from the carriage. ■ Disconnecting the USB cable - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 174
4 the protective cap from the rear screw hole on the side of the machine, and then insert an opened USB cord clamp. Check that the USB cord clamps firmly inserted into the front and rear screw holes on the side of the machine. • If the USB cord clamps are not firmly inserted into the screw holes - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 175
Please visit our web site "http://solutions.brother.com" for more details. ● The processing speed may vary by port selection and quantity of data. Insert the USB media into the primary (top) 1 USB port on the machine. Depending on the type of USB media being used, either directly plug the USB device - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 176
SELECTING/EDITING/SAVING PATTERNS Touch . 2 Select an embroidery pattern. 4 Touch the key for the desired 4 Touch this key to move up one folder level. 174 1 2 3 1 Shows the amount of memory used by selected pattern. 2 Shows the amount of free space in the USB media. 3 Touch this key to - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 177
data From this screen, the embroidery data stored on the USB media can be organized the screen before was touched. Note ● To delete the USB media pattern data, delete it from the machine. This will delete design data completely. Touch . 5 5 This confirms the pattern selection. X The pattern - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 178
) Memo ● When connecting multiple embroidery machines to the computer, use a commercially available USB hub. Please note that we recommend you to use a self-powered USB hub. Do not use USB extension cables or repeater cables. For details on using the USB hub, refer to its operating instructions. 176 - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 179
the following message appears, touch . Using embroidery editing software provided 6 with the Link function, such as PE-DESIGN NEXT or later from a computer, send the embroidery pattern to the machine in the Link mode. Sending Embroidery Patterns From a Computer to the Machine (Link Function) 177 - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 180
/SAVING PATTERNS When the following message appears, touch 7 . Note ● For details on using the embroidery editing software, refer to the Instruction Manual included with it. X A message appears in the machine's LCD while the machine is connecting to PC. * This Link dialog box is found in PE - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 181
● While the embroidery machine is connected to the computer, the machine's 5 status can be displayed by using a function of the embroidery editing software. If multiple embroidery machines are connected at the same time, check the status of the machines using the 10-digit machine ID that - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 182
touch and 1 to display page 5/5 of the settings screen. Touch 2 to disable the Link function. X When the following message appears, touch . Memo ● If the embroidery machine is turned off while it is embroidering, the resume operation can be used the next time it is turned on. Turn off the - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 183
twice the size of the normal previewed image. Touch . 1 Combining patterns Various patterns, such as embroidery patterns, frame patterns, built-in alphabet patterns and patterns on embroidery cards, can easily be combined. Touch . 1 X The enlarged pattern image is displayed on the screen - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 184
SELECTING/EDITING/SAVING PATTERNS Select an embroidery pattern. 2 Select the pattern to be added as described on page 153 to 175. Selecting the pattern to be edited If multiple patterns are selected, - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 185
• To return the pattern to its position before it was moved (center of the embroidery frame), touch . Touch the key for the direction where you 1 wish to move the screen are used to move the frame to select the embroidering position. Editing the Embroidery Pattern (Pattern Editing Screen) 183 - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 186
SELECTING/EDITING/SAVING PATTERNS Flipping a pattern horizontally Touch 1 so that it changes to . Example: Original angle X The pattern is flipped horizontally. • Each touch of the key turns the setting either on or off. Reduces without changing the height-towidth proportion. Reduces only in - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 187
again. Example: Original angle Rotates 90 degrees to the right Rotates 10 degrees to the right CAUTION Rotates 1 degree to the right ● After changing the size of the pattern, check the icons for the embroidery frames that can be used and use only the indicated frames. If a frame other than those - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 188
● After changing the angle of the pattern, check the icons for the embroidery frames that can be used and use only the indicated frames. If a frame other than those indicated are used, the presser foot may hit the embroidery frame and cause injuries. 186 X The screen shown below appears. Arranges - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 189
original spacing, touch . If necessary, touch the arrow keys to adjust 3 the position of the pattern. (For more details, refer to page 183.) Editing the Embroidery Pattern (Pattern Editing Screen) 187 - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 190
Combined character patterns can be separated to adjust the character spacing or to separately edit the patterns after all character have been entered. Touch . 1 Use to select where the pattern 3 is to be separated, and then touch to separate it. For this example, the pattern will be separated - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 191
5% increments can be specified. Touch . 1 Trimming the threads between characters If the machine is set to trim the threads between the characters, the jumpstitches between the characters are . Threads are trimmed. Less Standard More Editing the Embroidery Pattern (Pattern Editing Screen) 189 - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 192
159 are set to black. The color of the characters can be changed using the change thread color key; however, to change the color of individual , refer to "Changing the colors of the pattern" on page 190. 190 X The 64 embroidery threads table screen appears. 1 6 2 7 3 4 5 8 1 The part of the - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 193
next color in the thread color sequence display. 5 Selects the previous color in the thread color Touch 4 . sequence display. 6 Thread color table Select a color from this table. 7 Use , , and to select the 3 new color from the color palette. 2 1 Embroidery Pattern (Pattern Editing Screen) 191 - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 194
keys 5 Spacing keys X The pattern direction indicator will change depending on the direction selected. Select the direction in which the pattern will 2 be repeated. Use 3 to repeat the pattern on left and to repeat the pattern at the right. • To delete the left pattern, touch . • To delete the - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 195
red frame will automatically be grouped as one repeating unit. See the following section on how to repeat one element of a repeated pattern. 5 Editing the Embroidery Pattern (Pattern Editing Screen) 193 - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 196
repeated pattern will be divided into separate elements. Touch . 4 X The pattern direction indicator will change depending on the direction selected. Use and to select the cut line. 2 Use and 5 repeat. to select the element to X The cut line will move. 194 Repeat the selected element. 6 - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 197
to cancel thread mark setting. Memo ● When there are two or more elements, use and or and to select a pattern that you want to assign a thread mark(s) is rotated in the embroidery settings screen, the thread mark will be removed. Editing the Embroidery Pattern (Pattern Editing Screen) 195 - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 198
thread or changing the sewing order manually. ■ Sewing the repeated pattern without pattern without sorting the colors. Create the combined border embroidery 1 pattern (Refer to page 192 to 193). . ● When a group of two or more patterns using border patterns is repeated, the sewing order is changed - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 199
repeatedly After creating the repeated pattern, rehoop the embroidery frame and keep sewing for the next pattern. Memo ● The optional border frame allows you to easily rehoop the fabric without removing the embroidery frame from the machine. Touch , then . 5 Create the repeated pattern with the - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 200
pattern is within the embroidering area of the embroidery sheet. 1 Pattern embroidered first 2 Position of pattern to be embroidered next 3 Embroidering area of embroidery sheet Touch . 8 Touch . 9 • To adjust the embroidering position without using the built-in-camera, refer to "Changing the - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 201
• Touch position. to check the embroidering Memo ● Touch to enlarge the camera view. By enlarging the camera view, you can make a close adjustment for the needle drop position moving the embroidery frame little by little. Editing the Embroidery Pattern (Pattern Editing Screen) 199 - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 202
the thread colors that you most often use. You can select thread colors offered by the machine's extensive list of thread colors from nine Visit our website at "http://solutions.brother.com" for Custom Thread Table Clear/Restore Program and instructions. Before creating a custom thread table - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 203
touch . Note ● When setting up custom thread table, touch , , or or touch the next square directly to set the next color after each selection. Machine will not advance to the next square automatically. 1 2 1 Entered thread color number 2 Thread brand Touch . 5 1 Touch 7 screen. to return - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 204
table, Touch . 1 touch , , or or touch the next square directly to set the next color after each selection. Machine will not advance to the next square automatically. Touch 6 screen. to return to the original X The 64 embroidery threads table screen displays. Touch . 2 1 1 Custom thread - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 205
Touch 3 to choose a new color from the custom thread table. • Use and to scroll through the custom thread table. • Touch to return to the original color. • You can choose colors from the custom thread (300 embroidery threads) table by directly touching the screen with the touch pen. - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 206
SELECTING/EDITING/SAVING PATTERNS Editing patterns as a group Combined patterns can be grouped and can all be edited (rotated, resized, etc.) at the same time. Touch 1 so that it changes to . X All patterns displayed in the pattern display area are grouped. Deleting a pattern Touch . 1 • - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 207
be edited as a single pattern. In addition, the arrow keys can be used to move the pattern in the pattern editing screen or move the embroidery frame in the embroidering settings screen. Touching these keys moves the embroidery frame. Rotating the entire pattern The entire pattern can be rotated - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 208
then edit. Touch . 1 To select the pattern, touch . 3 Select . 2 X The pattern editing screen appears. Touch . 4 X This pattern will be positioned at the center of the embroidery area. X The pattern type selection screen appears again. 206 - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 209
"d". • With a USB mouse, your finger or the touch pen, drag the characters to move them. Touch . 0 X The selected letters appear at the center of the embroidery area. X The pattern type selection screen appears again. Editing a Combined Pattern 207 - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 210
screen appears. Touch / / and adjust the d position of the letters so that they are well balanced. X The selected letters appear at the center of the embroidery area. 208 - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 211
Check the balance of the entire pattern, and, e if you wish to edit the pattern, touch Touch . g and to select the pattern to be edited. If a USB mouse is connected, the pattern can be selected by clicking it. Move the mouse to position the pointer over the desired pattern, and then click - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 212
SELECTING/EDITING/SAVING PATTERNS • If it is difficult to view the text and the After finishing all editing, touch and pattern, touch and then touch , j then . , or to preview. Touch again to return to the previous screen. X The embroidering settings screen appears. Memo ● Touch to - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 213
Saving Embroidery Patterns Machine's memory You can save embroidery patterns that you have customized and will use often, for example, your name or other pattern combinations, patterns that have been rotated or resized, or patterns that have had their embroidering position changed. A - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 214
1 Shows the amount of memory used by selected pattern. 2 Shows the amount of free space in the machine's memory. 3 Touch this key embroidery data was saved successfully, the previous screen automatically appears. • Saving the data takes approximately 10 seconds. Note ● Do not turn off the machine - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 215
sending embroidery patterns from the machine to USB media, plug the USB media into the machine's USB port. Memo ● Some USB media may not be usable with this machine. Please visit our web site "http://solutions.brother.com" for more details. ● Depending on the type of USB media being used, either - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 216
may be damaged. Touch . 3 • Touch to return to the original screen without saving. Computer (USB) Using the included USB cable, the embroidery machine can be connected to your computer, and the embroidery patterns can be saved in the "Removable Disk" folder in your computer. A total of about - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 217
computer)". • The USB cable can be plugged into the USB ports on the computer and embroidery machine whether or not they are turned on. Touch 3 when the pattern you want to save on the computer, refer to the instruction manual for the corresponding equipment. Saving Embroidery Patterns 215 - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 218
SELECTING/EDITING/SAVING PATTERNS 216 - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 219
, introduced on page 41. Details on changing the basic embroidery machine settings and viewing operations on the LCD will be provided. Using the Settings Key 218 Understanding the settings screen 218 Changing the display guides 220 Changing the thread color information 222 Selecting the thread - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 220
between the appliqué pattern and the outline. (Refer to page 127.) B Use the application check when running an application. Note ● If the settings for "DST" Setting 7 or Short Stitch Delete 8 are changed from the previous setting, the new settings are only applied to the next embroidery. 218 - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 221
Needle Bar and Sewing Speed Settings" on page 145.) C D E F G H I C Screen Saver Select the length of time until the screen saver appears, and change the image of the screen saver. (Refer to page 227.) D Opening Screen The machine is used. (Refer to page 231.) 6 Using the Settings Key 219 - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 222
function on or off. (Refer to "Sending Embroidery Patterns From a Computer to the Machine (Link Function)" on page 176) K Manual Color Sequence Set the Manual color sequence on or off. (Refer to "Selecting/Managing Thread Colors for Each Needle Bar (Manual Color Sequence)" on page 132) L Units of - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 223
embroidery frame When the embroidery machine is purchased, the extra-large embroidery frame is selected. Touch and to select the desired 1 embroidery frame display. The embroidering area for the desired embroidery (W)) Large embroidery frame 130 mm inches (W)) Small embroidery frame 40 mm - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 224
is displayed as specified. Changing the thread color information You can display the name of the thread colors, embroidery thread number or the embroidery time. When the embroidery machine is purchased, the thread color number (#123) is selected. The thread color display setting can be specified - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 225
ON: The thread color information displayed according to the PE-DESIGN, PE-DESIGN Lite or PED-BASIC (embroidery editing software) OFF: The thread color information displayed according to the machine setting. When the machine is purchased, "OFF" is selected. 6 Time Time Using the Settings Key 223 - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 226
background color from the 66 settings available. Different background colors can be selected for the pattern display area and pattern thumbnails. When the embroidery machine is purchased, gray color is selected. The background color settings can be specified from page 1/5 of the settings screen - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 227
number of jump codes. ON: The machine cuts the upper and bobbin thread before the jumpstitch. When Tajima embroidery data (.dst) is used, the machine converts the "jump" code to a trim code, based on the number specified on the next line. OFF: The machine does not cut either a jumpstitch or - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 228
embroidery data other than our original patterns are used, the stitch length may be too short, possibly resulting in the thread or the needle breaking. In order to prevent this problem from occurring, the machine from the previous setting, the new setting is only applied to the next embroidery. 226 - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 229
of the needle) has a standard tail or long tail. When the embroidery machine is dimension 480 × 800 pixels or less, (If the width is more than 480 pixels, the image imported will be reduced to a width of 480 pixels.) Number allowed 5 or less Changing the screen saver settings Note ● When using - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 230
HELP FEATURE Touch . 2 Select the device that is connected. 5 Connect the USB media or the computer 3 (using a USB cable) that contains your personal image to the USB port of the machine. • Refer to page 82 about USB connectivity. Touch 4 to select the first image. • Touch when connecting - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 231
"1" and "5". When "OFF" is selected, no sound is produced from the speaker. When the embroidery machine is purchased, "5" is selected. The speaker setting can be specified from page 4/5 of the settings screen light brightness is selected by checking the embroidering area. Using the Settings Key 229 - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 232
when the machine stops, when is set to "OFF", the machine does not stop until embroidering set it to "OFF". When the machine is purchased, "ON" is selected. in the particular situations; when the machine starts sewing, thread changed, a machine will not be able to detect if the upper - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 233
the pointer shape when a USB mouse is used The shape can be selected for the pointer that appears when a USB mouse is connected. Depending upon the background color, select the desired shape from the three that are available. When the embroidery machine is purchased, is selected. The mouse pointer - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 234
information. ■ Contents of Categories Principal Parts Displays and explains principal parts of the machine and their functions. Troubleshooting Basic guide for problems solving. Basic Operation Illustrates basic threading and hooping instruction. Maintenance Instruction for maintaining your - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 235
Installing the cap frame driver A movie showing the procedure can be viewed by touching when in the instructional area for the above topics. While a movie is being shown, the key changes to . 6 X The procedure for threading the upper thread appears. Using the Machine Operations Guide Key 233 - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 236
BASIC SETTINGS AND HELP FEATURE Touch . 6 2 3 1 4 5 6 1 Touch this key to return to the illustration. 2 Touch this key to continue showing the movie. 3 Touch this key to pause the movie. 4 Touch this key to fast-forward the movie. 5 Touch this key to rewind the movie. 6 Touch this key to - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 237
289 On-screen troubleshooting ...........289 Troubleshooting 290 Error messages 298 If the machine does not respond when a key is pressed 307 Specifications 308 Embroidery machine specifications.......308 Upgrading Your Machine's Software......309 Upgrade procedure using USB media.......309 - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 238
the built-in embroidery patterns can be used for sewing appliqués. Follow the procedures described below to sew appliqués using the patterns or garment in the 4 embroidery frame, and then sew an "APPLIQUE POSITION" pattern. The appliqué position is sewn, and then the machine stops. ■ Procedure for - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 239
• Depending on the pattern, an "APPLIQUE" pattern may not be available. In this case, sew the appliqué using thread in the color of a part of the embroidery. Finish sewing the embroidery. 7 Select a frame pattern sewn with straight 1 stitches to embroider onto the fabric for the appliqué. Carefully - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 240
out in step 1, and then attach the appliqué piece to the base fabric. Using a frame pattern to create appliqués (2) There is another way of sewing appliqués. With this method, there is no need to change the fabric in the embroidery frame. The appliqué can be created by sewing two frame patterns of - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 241
Embroider over the appliqué fabric using the 3 same frame pattern. Select the satin-stitched frame pattern with 5 the same shape. • Be sure to stop the machine before the cross at the center is sewn. Remove the embroidery frame from the 4 machine, and then cut off the excess appliqué fabric - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 242
designs larger than the embroidery hoop are divided into multiple sections, which combine to create a single pattern after each section is sewn. For details on creating large-size embroidery patterns and for more detailed sewing instructions, refer to the operation manual included with PE-DESIGN - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 243
fabric and the embroidery frame. • Be sure to select fabric of the size of combined pattern. Hoop the appropriate part of the fabric. In 5 this case, hoop upper-left alignment stitching. Use this stitching for placement of adjacent pattern section. Sewing Large-size (Split) Embroidery Patterns 241 - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 244
. In this case, align the left side of the hoop on the right side of the design section embroidered in step 6. X A screen appears so that a section of the large-size embroidery pattern can be selected. Touch to select the next section of the 9 pattern, and then touch . 1 Alignment stitching - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 245
This section provides descriptions to operations useful in the operation of this machine. Checking the thread tension of built-in patterns Touch . 3 We will sew this pattern to check the thread tension. Touch . 1 Touch . 4 X The embroidery pattern categories appear. Touch . 2 Touch - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 246
position can be checked, and then the beginning of stitching can be reset. Next, the beginning of stitching can be set in the lower-right corner to is necessary, refer to instructions on page 68 or 122/123. X The frame moves so that the needle drop point aligns with the beginning of stitching. - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 247
mark this point on the 3 fabric. Remove the embroidery frame from the 6 machine, and then connect these two points to check the line, reframe the fabric in the embroidery frame or adjust the position of the pattern. X The frame moves so that the needle drop point aligns with the beginning of - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 248
embroidery data appears as shown below in the Tajima format (.dst) In order for the parts of the pattern to be differentiated when Tajima data is used with this machine is recommended to try the Manual color sequence if you use Tajima data very often. Using the Manual color sequence, you can directly - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 249
embroidery are described below. Threads Embroidery thread can be costly used on the embroidery machine. It is important that embroidery needle. For every reduction of 14 thread breaks per a day, output can be improved by more than 1.0 %. Stabilizers (backing) Embroidery support "spot problems" where - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 250
) backing is used on those difficult-to-hoop fabrics. This embroidery stitches as your machine sews. The result is an unfinished and often sloppy appearance when fibers of the fabric poke out between the finished stitches of an embroidery design. In these situations, watersoluble stabilizer is used - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 251
of it. Cap frames: These are specialized embroidery frames (hoops) designed to hold caps for embroidering. They are available in a variety of styles for various machines, with two basic styles: one that allows sewing a flattened cap (for use on a flat machine) or one that allows sewing the cap in - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 252
caught in the terry loops. If garment slips in frame, causing alignment problems, wrap inner frame with masking tape or fabric bias tape. This use two pieces of lightweight backing instead of one piece of heavy backing. Reduce speed if needle begins to heat up and the thread breaks. Change needles - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 253
of the installed table or press down on it. ● Remove the table from the machine while using embroidery frame that do no need to be used with the table or while embroidering tubular items, bags or caps. The embroidery frames for these types of objects cannot be installed while the table is attached - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 254
side to the bottom of the table) fit into the notches in the guide plates. While looking below the table, lightly lift it 5 up, and then of the guide plate. 1 Pin 2 Notch Slide in the table while supporting it so that 4 it remains level. Push the table in until it lightly touches the machine. • - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 255
two thumb screws, lift up the 1 table, and then pull it off toward you. After the pins on each side reach the notches 2 in the guide plates, raise the table to lift the pins up through the notches. 1 Thumb screw 1 Pin 2 Notch X Remove the table from the - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 256
Instruction Manual provided with the embroidery editing software version PE-DESIGN NEXT or later. After the jumbo frame pattern has been created, follow the procedure described below to transfer the pattern to the machine using the optional jumbo frame. ● After hooping fabric or a garment, make sure - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 257
Fabric" on page 94. Note ● When hooping the fabric, position it within the embroidery frame so there is at least 10 mm of space to the inside of the frame. Note ● When you change the embroidering position using the jumbo frame, be sure to be aware of the size of the combined pattern. You - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 258
APPENDIX An image of the needle location appears in 8 the screen with the positioning detection area framed by a red line. Affix an embroidery positioning sticker so that it fits within the red line, and then touch . When the machine's built-in camera has 9 finished detecting the location of - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 259
a detect the location of the embroidery positioning sticker. Touch to select the next section of d the pattern to be embroidered, and then touch . When the machine's built-in camera has b finished detecting the location of the embroidery positioning sticker, the following message appears - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 260
accessories The cap frame driver and the mounting jig are required in order to use the cap frame. Cap frame 1 Embroidering area: 60 mm (H) × 360 mm to the carriage, remove the embroidery frame holder, and then attach this cap frame driver to the carriage of the machine. 1 Insert the thumb screws - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 261
your Brother dealer. Note ● If the cap embroidery frame is attached, the embroidery frame indicators, showing which embroidery frames can be used, appear as shown below. Types of caps With the machine, we recommend that the following types of caps be embroidered. ■ Standard (Pro Style) 1 Face: Pro - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 262
• Melton Wool • 100%Nylon • Suede Preparing to use the cap frame ■ Installing the cap frame driver Touch → → → in order to view a video of the operation on the LCD (refer to page 232). Remove the embroidery frame holder from the carriage on the machine, and then install the cap frame driver - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 263
thumb screws remain attached to the embroidery frame holder. 1 Machine bed Note ● Be careful that embroidery frame holder. Remove the two upper thumb screws of the 2 cap frame driver and set aside. Loosen the two lower thumb screws (4 turns). 1 Upper thumb screws 2 Lower thumb screws 7 Using - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 264
plate of cap frame driver. While pushing in the cap frame driver 7 toward the machine so that it is fully inserted, tighten the two lower thumb screws to secure the cap 2 Ring Memo ● If the same machine is being used, the adjustment to the cap frame driver is only required the first time that the - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 265
Allen screwdriver (medium) Note ● Do not loosen them too far. Lower the L-shaped bracket to make it touch 3 the machine bed and then tighten the two hexagonal screws using the Allen screwdriver (medium). Firmly tighten the screws. 1 Hexagonal screws 2 Allen screwdriver (large) X When the screws are - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 266
APPENDIX Lightly press down the ring, and then use the 6 Allen screwdriver (large) to tighten the four mounting surface by tightening the thumb screw. ■ Installing the needle plate spacer Attach the needle plate spacer to the needle plate. 1 Mounting bracket 2 Mounting surface 3 Tighten thumb - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 267
there is a gap between the clamp of the thumb screw and the mounting surface, insert the included pad as shown below. ■ For the standard type Using a Phillips screwdriver, loosen the three screws (one each at the top and on the left and right sides) on the outside of the mounting jig - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 268
you, and then use the Phillips screwdriver to jig with the cap clamped. Next, attach the cap frame to the cap frame driver on the machine. ■ Attaching the cap frame with the guide plate on the top of the mounting jig. X This completes the preparation of the mounting jig. 1 Guide plate on mounting - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 269
of the stabilizer into the 5 holes at the bottom of the cap frame to firmly secure it. 1 Snap lock released 2 Clamping frame opened 3 Brim holder 7 Using the Optional Cap Frame 267 - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 270
APPENDIX Lift out the sweat guard on the inside of the 6 cap, and then place the cap over the cap frame. Using both hands, hold both sides of the cap, and then align the edge of the lower frame with the base of the brim. Align the - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 271
of the snap lock, check that the cap has not moved out of position and that there are no wrinkles. Adjust the cap if necessary. Using the Optional Cap Frame 269 - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 272
APPENDIX Close the lever of the snap lock. b Pull the brim holder up as far as possible, c flipping the holder over the cap brim then pushing down on the holder to secure the brim. 1 Lever of the snap lock Note ● If the cap fabric is thick and the clamping frame cannot be closed, or if the - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 273
to the right, release the lever to lock the cap frame in place. Use the clips to secure the cap. g Attach the clips with their handles folded inward. If the handles are pointed outward, they may be hit by the machine's presser foot. 1 Handle 2 Lever Pull the ends of the cap out from the - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 274
APPENDIX Use the clips to secure the cap. j Remove the embroidery machine. Before attaching the cap frame to the machine, attach the cap frame driver to the carriage. (Refer to "Installing the cap frame driver" on page 260.) Before attaching the cap frame, adjust the position of the cap supports - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 275
guiding plate on the cap frame driver, and then snap the frame into place. 1 Holder 2 Handle Before removing the cap frame, turn it to the left so that the brim of the cap does not hit the embroidery machine to be embroidered. 1 Brim holder 2 Snap lock 3 Clips Using the Optional Cap Frame 273 - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 276
embroidery frame holder After embroidering using the cap embroidery frame is finished, remove the needle plate spacer and cap frame driver, and then re-attach the embroidery frame holder. Remove the needle plate spacer. 1 Remove the cap frame driver. 4 1 Needle 2 Centerline of guiding plate 3 Holes - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 277
stitches. 1 1 Pins in the frame-mounting plate 2 Holes on the embroidery frame holder Secure the embroidery frame holder with the 7 two thumb screws. Start the embroidery pattern from the 2 center, and sew toward the ends. With the machine, the order in which patterns are selected when they are - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 278
APPENDIX When sewing outlines of patterns, make sure 3 that the stitch width of the satin stitching is at least 2 mm, and that the stitching overlaps the fabric by at least 1 mm. Also, make sure that there are no jumps of long stitches in the outlining on each region or letter. 1 At least 1 mm 2 - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 279
stable surface. ● Only use the bobbins supplied with this guide XC6644-151 9 Weight (L) XC5974-151 5 AC adapter XE1610-101 10 Weight (S) XC6631-051 * Visit your authorized Brother dealer. Memo ● The part code of the bobbin winder set may differ depending on the country/area where the machine - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 280
AC adapter, be sure that the unit is not operating. ● After using the bobbin winder, disconnect it from the electrical outlet. 1 Pins on thread guide 2 Notches on hole for thread guide 3 Hole for thread guide • Firmly insert the thread guide as far as possible and make sure that it is secure. 278 - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 281
Also use the included spool cap to keep the small spool stable. Pass the thread through the hole in the left of 3 the thread guide toward shaft Set the thread spool on the spool pin. 2 1 Hole in the thread guide Pass the thread around the tension disc as 4 shown in the illustration. Make sure - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 282
the hole in the right 5 of the thread guide toward the back of the machine. Note ● Be sure to follow the procedure tangled around the bobbin and cause the needle to break. Slide the bobbin holder, until it clicks into 8 place. 1 Hole in the thread guide Wind the thread clockwise around the 6 - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 283
● Check that the bobbin thread has been wound correctly, otherwise the needle may break or the thread tension will be incorrect. ● Be sure use both weights, large (L) and small (S). For detailed instructions on how to adjust the bobbin tension, refer to page 122. Pull the thread through the guide - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 284
the hook Periodically remove lint and dust for better performance from Hook race area. Use the included cleaning brush. Turn off the embroidery machine. 1 CAUTION ● Unplug the power supply cord before cleaning the machine, otherwise injuries or an electric shock may occur. Open the hook cover, and - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 285
and the error message may appear, or various parts of the machine may be damaged. Make sure to clean around the needle plate once a month. Use on offset screwdriver and the included cleaning brush. Turn off the embroidery machine. 1 After cleaning is finished, insert the bobbin 4 case into the hook - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 286
. Therefore, it should be cleaned each time when the bobbin is changed. Use a piece of paper with the thickness of a business card. Open the hook 1 Remove all lint in this area After cleaning is finished, attach the needle 4 plate in the opposite way that it was removed in step 2. Slide the paper - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 287
upper threads If dust or lint has accumulated in the thread guides or tension unit in the paths of the upper threads, the thread may break while embroidery is being sewn. Periodically clean the thread paths. ■ Cleaning the thread guides Use the included cleaning brush to remove 1 any lint and dust - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 288
turn dial 1 counterclockwise as shown on illustration. 1 Tension dial Using the included cleaning brush, remove 2 any lint and dust from to lose any parts or install any parts in an incorrect order. The machine may not operate correctly if the tension units are incorrectly reassembled. 1 Tension - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 289
may appear. Afterward, put a drop of oil onto the hook once a day before use, and put a drop of oil to the lower needle bar felt washer every 40 to 50 hours of machine use. ■ Oiling the race Turn off the embroidery machine. 1 Rotate the handwheel (about 50 degrees) to 3 move the race of the hook - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 290
of oil onto the hook once a day before use. ● Apply one drop of oil on the lower needle bar felt washer every 40 - 50 hours of sewing time. ● Apply only sewing machine oil. Use of any other type of oil may result in damage to the embroidery machine. ● Do not apply too much oil. Fabric or - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 291
On-screen troubleshooting This embroidery machine is equipped with an easy-to-use troubleshooting feature for problems during sewing. Touch the key that shows the problem, and then check for the causes that are displayed. Touch . 1 Check the items that are displayed. 4 After checking - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 292
APPENDIX Troubleshooting If the machine does not operate correctly, check for the following points/issues before requesting service. If the suggested remedy does not correct the problem, contact your Brother dealer. Symptom The embroidery machine does not operate. The embroidery frame cannot be - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 293
the needle bar case. Consult your nearest Brother dealer. The thread density of the embroidery data is too fine. Three or more overlapping stitches are being sewn. Using a data design system, correct the thread density and overstitching settings in the embroidery data. p.150 Troubleshooting 291 - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 294
. The needle hits/touches the presser foot. The area around the embroidery foot hole is damaged. Consult your nearest Brother dealer. Replace the presser foot. Consult your nearest Brother dealer. 1 Scratches/Burrs Using a specialty thread like a metallic thread. Slow down the machine sewing - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 295
machine and re-thread the machine. Make sure the thread is correctly positioned in the needle bar thread guide case with a new one. p.35 machine is not used. Use the correct bobbin. p.35 The automatic needle-threading Consult your nearest Brother mechanism is broken. dealer. Troubleshooting - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 296
. Thread the upper thread correctly. Replace the needle with a new one. Correctly install the needle. Clean the hook and the needle plate. Consult your nearest Brother dealer. Improper twisting results in irregular loop formation. Try using a new spool. Use tweezers to remove any tangled thread from - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 297
while replacing bobbin thread, changing needle, or working near embroidery frame. If the carriage is moved, turn the machine off, then on again. The correct frame position at the time that the machine was stopped is stored in the machine's memory, and the embroidery frame is returned to the correct - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 298
correctly. The hook is damaged. Not enough oil was applied. The needle is not at the correct position. Recommended needles are not used on this machine. The needle is not installed correctly. The hook on the automatic needle-threading mechanism is bent. The upper thread is not threaded correctly - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 299
next thread color, LED light does not indicate the next thread color. The light turns off after flashing. p.113 When embroidering thick fabric, the fabric cannot be correctly hooped image displayed in the LCD screen. If the machine is being used in a very cold environment, there may be flickering - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 300
, correct the problem according to the instructions in the message. To close the message, touch or perform the correct operation, then touch appears again, consult your nearest Brother dealer. . If the message Some malfunction occurred. There are too many characters in Machine cannot receive - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 301
came out of the thread out. Check which embroidery frames tension disc or a thread guide, or Check that there is thread on the can be used, and then install a the machine is not threaded bobbin and that approximately 50 larger embroidery frame. (Refer to correctly. mm (2 inches) of thread - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 302
the threading the needle. Delete some patterns from the automatic needle-threading Press the automatic needle combined pattern. either the embroidering screen. machine or the USB media. Touch to return to the embroidering settings screen. The previous embroidery in the embroidering screen - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 303
turned off. Follow the procedure described in "Resume Embroidering After Turning Off the Machine" on page 120 to align the needle position and sew the remainder of the pattern. was touched while thread colors were the thread marks will be removed even if they have been set. 7 Troubleshooting 301 - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 304
trimming function. The machine needs maintenance. (Refer to page 288.) Machine has recognized the embroidery position mark. Remove the embroidery positioning sticker and touch to continue. The machine is retrieving a previously saved pattern. The machine was stopped while the needle bar case was - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 305
use an editing An unusable embroidery embroidery card. According to copyright laws, patterns that are illegal to Move the pattern so it is completely within the outline. 7 reproduce or edit cannot be saved to USB media or a computer. Save the pattern in the machine's memory. Troubleshooting - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 306
combined with another embroidery pattern. This pattern can not be combined. The pattern has too many stitches You tried to retrieve a pattern that You tried to use incompatible and cannot be used. was downloaded for a different media. Data with stitches that exceed machine. specifications (500 - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 307
If any of the following messages appear, consult your nearest Brother dealer. 7 Troubleshooting 305 - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 308
APPENDIX 306 - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 309
the screen shown below appears. • The start/stop button is red. X The adjustments screen appears. Use the included touch pen to touch the 2 center of the numbered crosses on the screen, from 1 , contact your nearest Brother dealer. 7 Turn the machine off, and on again. 4 Troubleshooting 307 - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 310
Embroidery machine specifications Item Weight Machine size Sewing speed Hook Type Hook size Needle Number of needle Thread tension Cap sewing Tubular sewing Thread trimming Thread breakage sensor Automatic needle Normal size (Type L) HA130EBBR / #11 10 needles Manual (Option) 60 mm (H) × 360 mm - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 311
or a computer to download software upgrades for your embroidering machine. When an upgrade program is available on "http://solutions.brother.com", please download the files following the instructions on the website and steps below. You can use USB to download software upgrades/updates upf) for your - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 312
message will appear. Copy the upgrade file to "Removable Disk". 4 Touch . 5 Remove the USB media, and turn the 5 machine off and on again. Upgrade procedure using computer While pressing the automatic threading 1 button, turn the main power to on. X The following screen will appear on the LCD - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 313
needle-threading button 21, 60 Automatic needle-threading mechanism 60 character spacing 187 colors of the pattern 190 display guides needle plate 283 bobbin case 284 hook 282 LCD 282 machine surface 282 B maintenance message 288 Background colors 224 oiling machine use guides - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 314
key 77, 134 Locking mechanism 64 Locking the needle bar 100 Low Profile (Low fitting 259 Lower thread guide 20 M Machine operations guide key 232 Main power switch 21, 40, 70 Maintenance 232, 282 Manual color sequence 132 Manual needle bar settings 145 Maximum sewing speed key 80 - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 315
knobs 20, 123 Thread trimming button 21, 67 Threading needle 60 upper thread 54, 56 Thumbnail size 224 Tips for machine operation 243 Touch panel 21 Trial sewing key 53, 77 Troubleshooting 232, 289 T-shirt 250 Sewing the embroidery 64 Sewing time 79 U Short stitch delete 218, 226 - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 316
APPENDIX Version 220 Volume of speaker 229 314 - Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 317
- Brother International Entrepreneur Pro PR-1000 | Users Manual - English - Page 318
Please visit us at http://solutions.brother.com where you can get product support and answers to frequently asked questions (FAQs). English 884-T10 XE8347-001 Printed in Taiwan
Product Code: 884-T10
Operation Manual
Embroidery Machine
PR-1000