Brother International Entrepreneur Pro PR-1000 Users Manual - English - Page 265

Turn on the machine. After the carriage 1 moves to its initial position, turn off the machine. Using the Allen screwdriver (large), loosen 4 the four hexagonal screws on the inside of the ring. Loosen the screws only by about one turn. Note ● Be sure to adjust the cap frame driver with the carriage at its initial position. Using the Allen screwdriver (medium), 2 loosen the two hexagonal screws. Loosen the screws only by about one turn. 1 Hexagonal screws 2 Allen screwdriver (medium) Note ● Do not loosen them too far. Lower the L-shaped bracket to make it touch 3 the machine bed and then tighten the two hexagonal screws using the Allen screwdriver (medium). Firmly tighten the screws. 1 Hexagonal screws 2 Allen screwdriver (large) X When the screws are loosened, the ring can be lowered. Note ● Do not loosen them too far. Insert the pad between the machine bed and 5 the ring of the cap frame driver. 1 L-shaped bracket 7 1 Pad 2 Machine bed 3 Ring of the cap frame driver Using the Optional Cap Frame 263