Brother International HE-800B Instruction Manual - English - Page 85

Brother International HE-800B Manual

Get Brother International HE-800B PDF manuals and user guides View all Brother International HE-800B manuals
Add to My Manuals
Save this manual to your list of manuals

Page 85 highlights

10. TABLE OF ERROR CODES Version updating errors Items with a "*" in the "Page" column should only be handled by a qualified technician. Code Cause Remedy E870 No control program for the operation Load the control program for the operation panel from the panel is present. SD card. E880 Version update received. requests cannot be Turn off the power, and then check that there are no problems with the wiring and the P.C. boards inside the control box. E881 Communication error was detected during version update. Turn off the power, and then repeat the version update procedure. If the error continues to occur, turn off the power, and then check that there are no problems with the wiring and the P.C. boards inside the control box. E883 No control program is present on the SD Check that the control program has been saved into the card. correct folder. E884 There is a problem with the control program. Write the correct file onto the SD card. E885 Writing of the control program cannot begin. Turn off the power, and then check that there are no problems with the wiring and the P.C. boards inside the control box which are to have their firmware versions updated. E886 Data error occurred during writing of the control program. Turn off the power, and then check that there are no problems with the wiring and the P.C. boards inside the control box which are to have their firmware versions updated. E887 Error occurred during writing of the control program. Turn off the power, and then check that there are no problems with the wiring and the P.C. boards inside the control box which are to have their firmware versions updated. Page * 10, 11* 10, 11* * * 10, 11* 10, 11* 10, 11* If an error code that is not listed above appears or if carrying out the specified remedy does not solve the problem, contact the place of purchase. HE-800B 76

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
10. TABLE OF ERROR CODES
HE-800B
76
Version updating errors
Items with a “*” in the “Page” column should only be handled by a qualified technician.
Code
Cause
Remedy
Page
E870
No control program for the operation
panel is present.
Load the control program for the operation panel from the
SD card.
*
E880
Version update requests cannot be
received.
Turn off the power, and then check that there are no
problems with the wiring and the P.C. boards inside the
control box.
10,
11*
E881
Communication error was detected during
version update.
Turn off the power, and then repeat the version update
procedure.
If the error continues to occur, turn off the power, and then
check that there are no problems with the wiring and the
P.C. boards inside the control box.
10,
11*
E883
No control program is present on the SD
card.
Check that the control program has been saved into the
correct folder.
*
E884
There is a problem with the control
program.
Write the correct file onto the SD card.
*
E885
Writing of the control program cannot
begin.
Turn off the power, and then check that there are no
problems with the wiring and the P.C. boards inside the
control box which are to have their firmware versions
updated.
10,
11*
E886
Data error occurred during writing of the
control program.
Turn off the power, and then check that there are no
problems with the wiring and the P.C. boards inside the
control box which are to have their firmware versions
updated.
10,
11*
E887
Error occurred during writing of the control
program.
Turn off the power, and then check that there are no
problems with the wiring and the P.C. boards inside the
control box which are to have their firmware versions
updated.
10,
11*
If an error code that is not listed above appears or if carrying out the specified remedy does not solve the problem,
contact the place of purchase.