Brother International HL-3075CW Quick Setup Guide - English - Page 24
Shipment of the printer, Repacking Instructions - printer cartridges
View all Brother International HL-3075CW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Other Information Shipment of the printer If for any reason you must ship your printer, carefully package the printer to avoid any damage during transit. We recommend that you save and use the original packaging. The printer should also be adequately insured with the carrier. CAUTION When shipping the printer, the DRUM UNIT, TONER CARTRIDGE assemblies and WASTE TONER BOX must be removed from the printer and put in a plastic bag. Failure to remove these items and put them in a plastic bag before shipping may cause severe damage to the printer and may VOID THE WARRANTY. Repacking Instructions Make sure that you have the following parts for repacking. b Fully open the top cover and take out all the drum unit and toner cartridge assemblies. Attach the protective cover to each of the drum unit and toner cartridge assemblies. Put each assembly into a plastic bag and completely seal each bag. a Plastic bags - to be supplied by you, the user; one for the waste toner box, and one each for the four drum and toner cartridge assemblies b Protective covers that the original drum and toner cartridge assembly came with c Packing material for locking the belt unit WARNING This printer is heavy and weights approximately 41.9 lb. (19.0 kg). To prevent injuries use at least two people to lift the printer. Be careful not to pinch your fingers when you put the printer back down. a Turn off the printer power switch, and then unplug the AC power cord. c Remove the belt unit by holding the green handle and lifting the belt unit up and out of the printer. d Remove the waste toner box from the printer, and then put it in a plastic bag and seal the bag completely. 24