Brother International Innov-is 4500D Operation manual of Alternate Bobbin Case
Brother International Innov-is 4500D Manual
 |
View all Brother International Innov-is 4500D manuals
Add to My Manuals
Save this manual to your list of manuals |
Brother International Innov-is 4500D manual content summary:
- Brother International Innov-is 4500D | Operation manual of Alternate Bobbin Case - Page 1
Attention Please review these important instructions regarding the bobbin case The Operation Manual refers to the alternate bobbin case as the "alternate bobbin case (pink marking)". However going forward, the alternate bobbin case will be referred to as "with no marking". This machine comes - Brother International Innov-is 4500D | Operation manual of Alternate Bobbin Case - Page 2
Le Manuel d'instructions fait référence au boîtier de rechange de la canette comme le "boîtier de rechange de la canette (marquage rose)". Toutefois, dans le reste du Manuel, ce même boîtier est dénommé "boîtier de rechange de la canette (sans marquage)". A la livraison, cette machine est équip - Brother International Innov-is 4500D | Operation manual of Alternate Bobbin Case - Page 3
Atención Consulte estas instrucciones importantes relativas a la caja de la bobina En el Manual de instrucciones se hace referencia a la caja de la bobina alternativa como la "caja de la bobina alternativa (marca rosa)". No obstante, más adelante se hará - Brother International Innov-is 4500D | Operation manual of Alternate Bobbin Case - Page 4
Atenção Analise estas instruções importantes relativas à caixa da bobina O Manual de Utilização refere-se à caixa de bobina alternativa como "caixa de bobina alternativa (marca cor-de-rosa)". No entanto, mais adiante, a caixa de bobina alternativa
-
1 -
2 -
3 -
4
 |
 |
Attention
Please review these important instructions regarding the bobbin case
The Operation Manual refers to the alternate bobbin case as
the
“alternate bobbin case (pink marking)”. However going
forward, the alternate bobbin case will be referred to as
“with no marking”. This machine comes equipped with the
alternate bobbin case (with no marking) for use in the same
manner as the
“alternate bobbin case (with pink marking)”.
a
1
Alternate bobbin case (no marking)
Adjusting the Alternate Bobbin Case
(with no marking)
A bobbin case with a green marking has been installed in
this machine, with an alternate bobbin case (with no mark-
ing) provided as an accessory. When using the embroidery
bobbin thread provided, please be sure to choose the green
marked bobbin case when performing utility stitch sewing
and embroidery functions. When in the embroidery function
mode, the alternate bobbin case (with no marking) should
be selected when substitute embroidery bobbin threads
(other than what is accompanied with your machine) are
being used. The alternate bobbin case (with no marking)
can be easily adjusted when bobbin tension changes are
required to accommodate different bobbin threads.
To adjust the bobbin tension for embroidery function, using
the alternate bobbin case (with no marking), turn the slot-
ted-head (-) screw with a (small) screwdriver.
1
2
1
Do not turn a phillips screw (+).
2
Adjust with a screwdriver (small).
■
Correct tension
Upper thread slightly appears on the wrong side of
fabric.
1
2
1
Right side
2
Wrong side
■
Bobbin thread is loose
Bobbin thread appears slightly on the right side of
fabric.
1
2
1
Right side
2
Wrong side
If this occurs, turn the slotted-head screw (-) clockwise,
being careful not to over-tighten the screw, approxi-
mately 30-45 degrees to increase bobbin tension.
■
Bobbin thread is tight
Upper thread on the right side of fabric seems to be lift-
ing/looping and bobbin thread is not seen on the wrong
side of fabric.
1
2
1
Right side
2
Wrong side
If this occurs, turn the slotted-head screw (-) counter-
clockwise, being careful not to over-tighten the screw,
approximately 30-45 degrees to decrease bobbin tension.
CAUTION
●
When adjusting the alternate bobbin
case, be sure to remove the bobbin from
the alternate bobbin case.
●
DO NOT adjust the position of the Phil-
lips (+) screw on the alternate bobbin
case as this may result in damage to the
bobbin case, rendering it unusable.
●
If the slotted-head screw (-) is difficult
to turn, do not use force. Turning the
screw too much or providing force in
either (rotational) direction may cause
damage to the bobbin case. Should
damage occur, the bobbin case may not
maintain proper tension.