Brother International Innov-is VM5100 Operation Manual - Page 104
Overcasting Using Presser Foot J
View all Brother International Innov-is VM5100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
SEWING THE STITCHES a Select a stitch and attach presser foot "G". CAUTION • After the stitch width is adjusted, rotate the handwheel toward you (counterclockwise). Check that the needle does not touch the presser foot. If the needle hits the presser foot, the needle may break and cause injury. a The needle should not touch the center bar • If the presser foot is raised to its highest level, the needle may strike the presser foot. ■ Overcasting Using Presser Foot "J" See page S-67 for the detailed information of stitches. Stitch Stitch name Overcasting stitch Presser foot b Lower the foot guide presser foot so that the presser is set flush against the edge of the fabric. Overcasting stitch Overcasting stitch Overcasting stitch Single diamond overcast Single diamond overcast c Sew along the presser foot guide. a Select a stitch and attach presser foot "J". a Guide S-34