Brother International Innov-is VM5100 Operation Manual - Page 118
Appliqué
View all Brother International Innov-is VM5100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
SEWING THE STITCHES c Attach needle presser foot "J". Check that the drops slightly off the edge of the appliqué, then start sewing. a Wrong side of fabric b Right side of fabric l Sew with the fold of the hem against the presser foot guide. m Remove the the fabric. basting stitching and reverse a Appliqué material 1 2 a Wrong side of fabric b Right side of fabric Appliqué a Use a temporary spray adhesive, fabric glue or a basting stitch to attach the appliqué to the fabric. * This will keep the fabric from moving during sewing. a Needle drop position ■ Appliqué Sharp Curves Stop the machine with the needle in the fabric outside the appliqué. Raise the presser foot and turn the fabric a little bit at a time while sewing for an attractive finish to the seam. a Appliqué b Fabric glue b Select or . * Adjust the stitch length and width to correspond to the appliqué shape, size, and quality of material (see page S-10). Memo • For details on each stitch, refer to the "STITCH SETTING CHART" on page S-67. S-48