Brother International Innov-is VQ3000 Operation Manual - Page 58
Attaching/Detaching the Toe, Using the Dual Feed Position Lever, Adjusting the Amount of Fabric,
View all Brother International Innov-is VQ3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
USING FUNCTIONS BY CONNECTING THE ACCESSORY TO THE MACHINE h Plug the connector of the dual feed foot into the jack on the back of your machine. ■ Using the Dual Feed Position Lever When the feed position lever is up, the black roller belt on the dual feed is not engaged. i Press buttons. to unlock all keys and All keys and operation buttons are unlocked, and the previous screen is displayed. ■ Attaching/Detaching the Toe Attach the toe by aligning the pins with the notches and snap it into place. When the feed position lever is down, the black roller belt on the dual feed is engaged. a Pins b Notches If you push down on the front part of the dual feed foot, the toe of the dual feed foot will snap off. Note • Do not operate the lever while sewing. ■ Adjusting the Amount of Fabric Feeding of the Dual Feed Foot The dual feed mechanism pulls the top fabric according to the set stitch length. With troublesome fabrics, fine tune the set length, by changing the dual feed feed adjustment in the settings screen. Note • As a default, some keys mentioned in the following procedures appear in light gray and are not available. To enable the keys for specifying the settings, attach the dual feed foot to the machine. The keys are enabled after the dual feed foot is detected. a Press . The settings screen appears. b Display page 1 of the settings screen. B-56