Brother International Innov-is VQ3000 Operation Manual - Page 69

USING SENSOR FUNCTIONS WITH SEWING STITCH f Press setting. to apply the reference position c Press . B 2 Sensor Functions * The setting can also be applied by long touching an adjustment area with the sensor pen.  The needle moves to the specified position to start sewing.  The guideline marker stops flashing.  The stitch selection screen appears again, and the stitch width changes to the setting specified with the sensor pen.  The sensor functions screen appears. d Press . Using the Sensor Pen to Specify the Stitching Width and Stitch Position The zigzag width and "L/R SHIFT" value can be specified. a Original stitching width/position b Adjusted stitching width/position a Turn on the machine. b Select a stitch pattern.  The stitching width setting screen appears, and the guideline marker flashes at the present left side of the stitch width. Note • If is not available, the stitching width cannot be specified with the selected stitch pattern. Select a different stitch pattern. e With the sensor pen, touch for the stitching width. the first point  The distance from the left reference line to the touched position appears in the stitching width setting screen.  The guideline marker moves to the touched position and flashes. Basic operations B-67