Brother International LB-6770 Users Manual - English - Page 108
Darning
View all Brother International LB-6770 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
UTILITY STITCHES Darning Fabric that has been torn can be darned. Darning is sewn as shown below. a a Reinforcement stitching Determine the desired length of the darning. a Set the button guide plate on buttonhole foot "A" to the desired length. (The distance between the markings on the presser foot scale is 5 mm (3/16 inch).) a Select stitch 58 or 59 . c • For details, refer to "Selecting stitching" (page 49). 1 Position the fabric so that the needle is 2 mm 2 d (1/16 inch) in front of the area to be darned, 3 and then lower the presser foot lever. 4 a Presser foot scale b Length of darning c 5 mm (3/16 inch) d 7 mm (1/4 inch) Memo z A bar tack with a maximum length of about 28 mm (1-1/8 inches) can be sewn. Attach buttonhole foot "A". b • For details on replacing the presser foot, refer to "Replacing the presser foot" (page 43). 1 2 a Tear b 2 mm (1/16 inch) • Pass the upper thread down through the hole in the presser foot. 106