Brother International LB-6770 Users Manual - English - Page 69
Sewing stretch fabrics, Sewing an even seam, allowance
View all Brother International LB-6770 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Sewing stretch fabrics First, baste the pieces of fabric together, and then sew without stretching the fabric. ■ Aligning the fabric with a needle plate marking The markings on the needle plate show the distance from the needle position of a seam sewn with the straight stitch (left needle position). Sew while keeping the edge of the fabric aligned with a marking in the needle plate. The distance between the markings in the upper scale is 1/8 inch (3 mm) and the distance between the markings in the grid is 5 mm (3/16 inch). a 5 1 2 4 a Basting Using the stretch stitches or the thread for knits gives 2 3 an attractive finishes. 4 5 9 10 34 6 Sewing an even seam allowance To sew an even seam, start sewing so that the seam allowance is to the right of the presser foot, and the edge of the fabric is aligned with either the right edge of the presser foot or a marking on the needle plate. ■ Aligning the fabric with the presser foot Sew while keeping the right edge of the presser foot aligned with a fixed distance from the edge of the fabric. a Seam b Presser foot c Centimeters d Inches e Needle plate f 1.6 cm (5/8 inch) a Seam b Presser foot Memo z If the straight stitch (left needle position, triple stretch stitch, basting stitch etc.) is selected, you can change the distance between the seam and the right edge of the presser foot by changing the stitch width. For details, refer to "Changing the needle position" (page 79). Useful Sewing Tips 67