Brother International LX-3125E Users Manual - English and Spanish - Page 37
Grip the hoop with the thumbs
View all Brother International LX-3125E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Select a stitch. b Draw the lettering (for monogramming) or c design (for embroidering) on the surface of the fabric. Put the fabric in the embroidery hoop with d the surface of the fabric facing up inside the well. Place the project under the needle and lower e the presser bar. Draw up the lower thread through the project f at the starting position by turning the handwheel toward you (counterclockwise), and then sew a few stitches to reinforce the stitching. ■ Monogramming Sew the lettering at a constant speed by moving the hoop slowly. ■ Embroidering Sew along the outline of the design by moving the hoop slowly. Then, sew to completely fill in the design with stitches by alternately sewing from the 3 outline of the design to the inside and from the inside to the outline. Grip the hoop with the thumbs and g forefingers of both hands while pressing the fabric with the middle and third fingers, and support the outside of the hoop with your little fingers. Start sewing. h CAUTION ● Be sure to keep your fingers away from moving parts, especially needles. Memo ● Be sure to keep the stitches close together. Select the desired length for straight stitch i (6-10) and sew a few stitches for reinforcing. Memo ● When the hoop is moved quickly, the stitches are longer. When the hoop is moved slowly, the stitches are shorter. 36