Brother International MFC-7860DW Advanced Users Manual - English - Page 10
Toner Settings, Toner Setting (Continue Mode), Receiving faxes in Continue Mode - replace toner
UPC - 012502627029
View all Brother International MFC-7860DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Chapter 1 Toner Settings 1 Toner Setting (Continue Mode) 1 You can set the machine to continue printing after the LCD shows Replace Toner. The machine will continue printing until the LCD shows Toner Ended. The default setting is Stop. a Press Menu, 1, 8. General Setup 8.Replace Toner b Press a or b to choose Continue or Stop. Press OK. c Press Stop/Exit. Note • If you continue printing in the Continue mode, we cannot guarantee the print quality. • While using Continue mode the print may appear faint. • After replacing the toner cartridge with a new one, the Continue mode will go back to the default setting (Stop). Receiving faxes in Continue Mode 1 The machine can store received faxes in the memory if you choose Continue mode when the LCD shows Replace Toner. When received faxes are printed in Continue mode the LCD will ask if the print quality of the fax is OK. If the quality is not good, choose 2.No. The machine will keep the faxes stored in the memory so you can reprint them after you replace the toner cartridge with a new one. If the print quality is good, choose 1.Yes. The LCD will ask if you want to delete the printed faxes from the memory. If you choose not to delete them, you will be asked again after you replace the toner cartridge with a new one. Note • The MFC-7360N and MFC-7460DN can store up to 400 faxes in memory and the MFC-7860DW can store up to 500 faxes in memory. • (MFC-7360N and MFC-7460DN) If you turn off the power switch faxes in memory will be lost. • The machine will keep faxes stored in Continue Mode even if you change the Continue setting to Stop. • If you install a new toner cartridge when the LCD shows Toner Ended, the machine will ask if you want to print the stored faxes. Choose 1. Print to print stored faxes. Toner End in Continue Mode 1 When the LCD shows Toner Ended the machine will stop printing. If the memory is full and you want to continue receiving faxes, you must install a new toner cartridge. 4