Brother International MFC-9010CN Network Users Manual - English - Page 51

Wireless configuration for Windows® using the Brother installer application (For MFC-9320CW) 2 The WEP key is for 64-bit encrypted networks or 128-bit encrypted networks and can contain both numbers and letters. If you do not know this information you should see the documentation provided with your access point or wireless router. This key is a 64-bit or 128-bit value that must be entered in an ASCII or HEXADECIMAL format. For example: 64-bit ASCII: Uses 5 text characters e.g. "Hello" (this is case sensitive) 64-bit Hexadecimal: Uses 10 digits of hexadecimal data e.g. "71f2234aba" 128-bit ASCII: Uses 13 text characters e.g. "Wirelesscomms" (this is case sensitive) 4 128-bit Hexadecimal: Uses 26 digits of hexadecimal data e.g."71f2234ab56cd709e5412aa3ba" 3 This is supported for WPA-PSK only 4 Encryption key, WEP key, Passphrase. For LEAP and EAP-FAST, record the User Name and Password For example: Network name:(SSID, ESSID) HELLO Communication Mode Infrastructure Authentication method WPA2-PSK Encryption mode AES Network key 12345678 • If you have previously configured the wireless settings of the machine, you must reset the network LAN settings before you can configure the wireless settings again. Press Menu, 7, 0 for Network Reset, press 1 for Reset and then choose 1 for Yes to accept the change. The machine will restart automatically. • If you are using Windows® Firewall or a firewall function of anti-spyware or antivirus applications, temporarily disable them. Once you are sure that you can print, configure the software settings following the instructions. • You need to temporarily use an Ethernet cable during configuration. (The Ethernet cable is not a standard accessory.) 40