Brother International MFC-9970CDW Quick Setup Guide - English - Page 25

For Wireless Network Users Connecting the Brother machine to the wireless network 20 Configure the wireless settings using the automatic wireless mode a Confirm your WLAN access point/router has the Wi-Fi Protected Setup or AOSS™ symbol as shown below. b Place the Brother machine within range of your Wi-Fi Protected Setup or AOSS™ access point/router. The range may differ depending on your environment. Refer to the instructions provided with your access point/router. c On your machine, press MENU. Press a or b to display Network, and press Network. Press WLAN, and then WPS/AOSS. When WLAN Enable? is displayed, press On. This will start the wireless setup wizard. Otherwise press Stop/Exit to exit from the wireless setup wizard. When Start WPS or AOSS on your wireless access point / router , then press OK. appears, press the Wi-Fi Protected Setup or AOSS™ button on your WLAN access point/router. See the user's guide for your WLAN access point/router for instructions. And then press OK. d A connection result message appears on the LCD and a WLAN report will automatically be printed. If the connection failed, check the error code on the printed report and refer to Troubleshooting on page 27. Wireless setup is now complete. A four level indicator at the top right of your machine's LCD will show the wireless signal strength of your access point/router. To install the MFL-Pro Suite, continue to step 21. For Windows® Users: Now go to page 31 For Macintosh Users: Now go to page 33 Windows® Macintosh Wireless Network This feature will automatically detect which mode (Wi-Fi Protected Setup or AOSS™) your access point/router uses to configure your machine. Note If your WLAN access point/router supports Wi-Fi Protected Setup (PIN Method) and you want to configure your machine using the PIN (Personal Identification Number) Method, see Using the PIN Method of Wi-Fi Protected Setup in the Network User's Guide. 25