Brother International MFC-P2000 Quick Setup Guide - English - Page 14
Action 7-3: Prepare DOS for the Machine, How to Use the Machine in Your DOS Application Software
UPC - 012502525394
View all Brother International MFC-P2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Action 7-3: Prepare DOS for the Machine How to Use the Machine in your DOS Application Software (without using the Windows system) Before working with application software that runs in DOS, if you do not already have a suitable driver installed, you will need to install a printer driver that matches one of the following supported emulations: HP LaserJet IIP, EPSON FX-850 or IBM Proprinter XL printers The following table shows combinations of printer drivers and printer emulation modes. To get the most out of this machine, you should install an HP printer driver in your application software. Printer driver supported in your application software HP LaserJet IIP™ HP LaserJet II™ Epson® FX-850™ Epson FX-80™ ® IBM® Proprinter XL IBM Proprinter Emulation mode to be selected with the remote printer console program HP LaserJet IIP emulation mode Auto emulation selection Epson FX-850 emulation mode Auto emulation selection IBM Proprinter XL emulation mode Auto emulation selection Note The best or recommended printer driver is indicated in bold. Be sure to choose the correct printer driver in your application software. Failure to do so may cause poor or inconsistent results. Ensure that the printing resolution is set to 300 dpi in your DOS application software. - 12 -