Brother International MFC-P2000 Quick Setup Guide - English - Page 28
Warning, High Temperature, Caution
UPC - 012502525394
View all Brother International MFC-P2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Warning After you have just used the machine, some internal parts of the machine are extremely hot. When you open the top cover, never touch the shaded parts shown in the illustration. High Temperature 2 Gently turn the lever on the toner cartridge forward until it stops. Note The toner cartridge cannot be removed unless the shutter is completely closed by turning the lever fully to the front. 3 Remove the old toner cartridge from the drum unit by pulling it out gently. ! Caution Handle the toner cartridge carefully. If toner scatters on your hands or clothes, wipe or wash it off with cold water immediately. 4 Unpack the new toner cartridge, gently shake it five or six times and then remove the protective part. ! Caution Only unpack the toner cartridge immediately before installing it into the machine. If toner cartridges are left unpacked for a long period of time, the toner life is shortened. You can only use a Brother genuine toner cartridge (TN-300 series) which is specially formulated to ensure top print quality. Damage caused by using toner cartridges other than Brother original is not covered under any warranty or service agreement. - 26 -