Brother International PC-6000 Users Manual - English - Page 19
Start/stop
View all Brother International PC-6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
3. Pass the thread through the thread guide as shown by the arrows. . 4. Place the bobbin on the bobbin winder shaft. Push the bobbin winder shaft to the right. • Spring on the shaft Groove of the bobbin Align the groove of the bobbin with the spring on the shaft. )if 2 5. Wind the thread clockwise around the bobbin four or five times, pass the end of the thread through the slit in the bobbin winder seat, and then pull the thread in the direction shown in the illustration. Use the cutter to cut the thread. 2 • Bobbin winder seat 3 6. Slide the speed range control lever to its maximum (as far to the right as possible). 7. Push the "START/STOP" button. The machine will stop automatically when the bobbin is full. 8. After the bobbin has stopped moving, push the "START/STOP" button to stop the machine. 9. Cut the thread, slide the bobbin winder shaft to the left and remove the bobbin. Note Immediately after winding the bobbin, it is normal to hear the sound of the clutch engaging when beginning to sew or manually turning the balance wheel. 16