Brother International PC-6000 Users Manual - English - Page 53
completed.
View all Brother International PC-6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
5. Push the "START/STOP" button to start the machine. while gently holding the end of the upper thread. Gently, feed the fabric by hand. 6- • The machine will stop with a reinforcement stitch automati- cally after sewing is completed. ▪ If you touch the automatic thread cutting key prior to sewing. the machine cuts both threads automatically after sewing is completed. • If the fabric wilt not feed (for instance, because it is too thick), touch the L stitch length setting key to increase the stitch length. 6. Open the buttonhole. Normal buttonhole and rounded buttonhole Insert a pin in front of the inside edge of both bar tacks. Insert the seam ripper into center of buttonhole. Cut towards the first pin. Then cut toward the other pin. Pin O )4 Keyhole buttonhole 7. Make a hole using the small eyelet punch in the key end, insert a pin into the inside edge of the bar tack. Insert a seam ripper into the hole made with the eyelet punch and cut towards the pin. Small eyelet punch (accessory #9 on page 6) • Pin 49