Brother International QL-1060N Users Manual - English - Page 32
Appendix, Controlling with the ESC/P Commands, Available Commands, Serial Cables - drive
UPC - 012502618812
View all Brother International QL-1060N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Introduction Creating Labels Appendix Controlling with the ESC/P Commands Fonts and several bar codes are embedded within this machine. You can send commands to print embedded characters and barcodes. Available Commands Commands available are P-touch proprietary commands based on ESC/P. For details, see the "Command Reference" included in the CD-ROM. ([CD Drive]:\Doc\Technical) Serial Cables The pin assignments for the serial cables (RS-232C cables) which can be used with this machine are shown in the table below. You can purchase the cables at an electronics store. Do not use an interface cable that is longer than 6 feet (2.0 meters). Brother QL-1060N side (D-sub female, lock screw #4-40 inch screw) PC side (D-Sub9P female) Signal Name DCD RXD TXD DTR GND DSR RTS CTS RI Pin Number 1 2 3 4 5 6 7 8 9 Pin Assignments Pin Number 1 2 3 4 5 6 7 8 9 Signal Name DCD RXD TXD DTR GND DSR RTS CTS RI The RS-232C serial connector part of this equipment is not Limited Power Source. Appendix 32 Available Commands