Brother International SB3734T Operation Manual - Page 20
Threading the right needle, Threading the left needle
View all Brother International SB3734T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Threading the right needle Run the thread in the sequence illustrated below, following the pink color and the numbers next to each threading point. Threading the left needle Run the thread in the sequence illustrated, following the yellow color and the numbers next to each threading point. 1. Pull the thread off the spool and directly up through the thread holder 1 and the thread plate 2 on the thread tree from back to front. 2. Pass the thread thourgh the hole 3 on the top of machine. 3. Pass the thread through the tension disc 4 which is in the channel next to the pink tension adjustment dial. 4. Guide the thread down the channel and across through the threading points 5 6 7 next to the pink color marks following the numerical order in the accompanying illustration. NOTE: Make sure the thread is through the right of the separater . 5. Bring the thread down through the needle bar thread guide and through the right needle 8 from front to back. (: two needles/ : one needle) 1. Pull the thread off the spool and directly up through the thread holder 1 and the thread plate 2 on the thread tree from back to front. 2. Pass the thread thourgh the hole 3 on the top of machine. 3. Pass the thread through the tension disc 4 which is in the channel next to the yellow tension adjustment dial. 4. Guide the thread down the channel and across through the threading points 5 6 7 next to the yellow color marks following the numerical order in the accompanying illustration. NOTE: Make sure the thread is through the left of the separater . 5. Bring the thread down through the needle bar thread guide and through the left needle 8 from front to back. (: two needles/ : one needle) 18