Brother International XL-2027 Users Manual - English - Page 19

Cleaning • Remove the power supply plug from the outlet. • Lint and dust easily accumulate. Always keep clean. Retaining ring Hook a Driver Latch lever Race body Retaining ring 0 33 a HOW TO REMOVE THE SHUTTLE HOOK 1. Raise the needle to its highest position. 2. Open the shuttle cover. 3. Take out the bobbin case. 4. Push latch levers outside and remove the retaining ring. 5. Remove the hook by grasping center post of the hook. NOTE: When needle is lowered, shuttle hook cannot be removed. CLEANING SHUTTLE RACE 1. Remove accumulated lint and thread from the retaining ring, hook, driver and race body with brush. 2. A cloth dampened with machine oil should be used to wipe shuttle race clean. 3. Clean shuttle hook in same manner as above. 4. Reassemble and push the latch levers inside. CLEANING FEED DOG 1. Take out the needle plate. 2. Clean the upper part of feed dog and shuttle race body with a brush. Oiling • Remove the power supply plug from the outlet. • OIL ONCE A WEEK IF THE MACHINE IS USED MORE THAN ONE HOUR PER DAY. IF THE MACHINE IS USED MORE OFTEN OIL EVERY DAY. Face Plate • OIL 2 TO 3 DROPS TO THE POINTS MARKED • After oiling, run the machine fast without thread. • Be sure to wipe off any excess oil. Top Cover kr ' \ j4) CD(') Il cg, 34