Brother International XL-2027 Users Manual - English - Page 8
Upper, threading, lower, thread
View all Brother International XL-2027 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Upper threading pool Holder \-1 1. Raise the presser foot lever. 2. Raise the needle to its high- est position by turning the balance wheel toward you. 1.40' (Large) (Small) 3. Place a thread spool on horizontal spool pin. 4. Choose an appropriate spool holder according to type and diameter of spool being used. (The diameter of spool holder should be larger than that of the spool itself) 5. Press the spool holder firmly to the spool. 6. Deliver the upper thread as illustrated. 11 Thread Take-up Lever '4; I I I 7. Make sure to guide the thread through thread-takeup lever from right to left. a To draw up lower thread Upper Thread a I .Lower Thread 1. Raise the needle and the presser foot to the highest position. With left hand, hold the end of upper thread and with right hand, turn balance wheel toward you until the needle moves down and up again to its highest position. 2. The upper thread has caught the lower thread in a loop. Pull the upper thread toward you and the lower thread will come up from the bobbin in a large loop. 3. Pull about 4 inches (10 cm) of thread under the toe of the presser foot toward the back of the machine. 12