Brother International XM3700 Users Manual - English - Page 19
the thread take-up lever from right to left
View all Brother International XM3700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Turn off the machine. 1 Raise the presser foot lever. 2 1 While holding the thread from the spool 5 with your right hand, pass the thread toward you, in the groove on the thread guide. 1 • Make sure that the spring in the groove catches the thread. 1 Presser foot lever Raise the needle by turning the 3 handwheel toward you (counterclockwise) so that the mark on the wheel points up. • If the needle is not correctly raised, the sewing machine can not be threaded. 1 1 Spring Feed the upper thread as shown in the 6 following illustration. 1 1 Mark on the wheel Pull up the spool pin and put a spool of 4 thread on this pin. CAUTION ● If the spool of thread is in the wrong place, or is set incorrectly, the thread may tangle on the spool pin and cause the needle to break. Make sure you guide the thread through 7 the thread take-up lever from right to left as shown in the following illustration. 1 1 1 Thread take-up lever Memo ● If the thread take-up lever is lowered, the upper thread can not be wrapped around the thread take-up lever. Make sure you raise the needle by turning the handwheel toward you (counterclockwise) so that the mark on the wheel points up. 18