Brother International XS3109 Operation Manual - Page 110
Symptom 3, The needle breaks, or the needle, bends and thus hits the needle, plate., Symptom 4,
View all Brother International XS3109 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
APPENDIX Remove the upper thread and bobbin. c • Refer to "Fabric is caught in the machine and cannot be removed" (page 103). Remove the bobbin case. d • Refer to "Fabric is caught in the machine and cannot be removed" (page 103). If threads remain in the bobbin case, remove e it. • Refer to "Fabric is caught in the machine and cannot be removed" (page 103). Insert the bobbin case so that the S mark on f the bobbin case aligns with the z mark on the machine. • Refer to "Cleaning the race" (page 95). Symptom 4 : The fabric is not fed. ■ Cause The thread has become clogged as the stitch is too fine. ■ Remedy Lengthen the stitch length. • Refer to "Adjusting the stitch length and width" (page 40). Attach the needle plate cover. g • Refer to "Cleaning the race" (page 95). Set the bobbin in the bobbin case. h • Refer to "Cleaning the race" (page 95). If the needle is bent, replace it with a new i one. • Refer to "Replacing the needle" (page 32). Turn on the machine, and then press the j needle position button to raise the needle. • Refer to "Upper threading" (page 25). Thread the machine correctly. k • For details on threading the machine, refer to "Upper threading" (page 25). Symptom 3 : The needle breaks, or the needle bends and thus hits the needle plate. ■ Cause You have not used the right combination of fabric, thread and needle. ■ Remedy Choose a thread and needle that are appropriate for the type of fabric. • Refer to "Needle types and their uses" (page 31). 108